nach oben

Fire Technology

Erschienen in:

30.07.2022

An Experimental Investigation on Assessment of Residual Mechanical Performance of Basalt Fiber Reinforced High Strength Concrete at Elevated Temperature

verfasst von: Muhammad Talal Afzal, Rao Arsalan Khushnood, Wisal Ahmed

Erschienen in: Fire Technology | Ausgabe 5/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This research explores the effect of basalt fibers (BFs) added in high strength concrete (HSC) to tailor its mechanical and microstructural response on being exposed to fire. Thermo-mechanical behavior of reference and modified formulations was monitored in ambiance alongside the exposed elevated temperatures till 100°C, 200°C, 400°C, 600°C, and 800°C. The dose of BFs was maintained as 1% and 2% by weight of cement in modified HSC formulations. The specimens were subjected to the controlled heat ramp of 5°C/min, to attain the desired temperature elevation with a hold time of 150 min. The heated specimens were then cooled by air till ambiance to test for residual properties. The test results revealed significant improvement in thermo-mechanical properties of BFs reinforced HSC formulations after being exposed to fire. Micro-forensics evidenced the homogenized distribution of BFs alongside their crack arresting actions throughout the matrix, contributing to the added residual performance. The matrix morphology of BFs reinforced HSC was also monitored to endorse any physical or chemical change in the hydration product. Moreover, numerical equations based on statistical analysis were formulated that can predict the fire behavior of modified HSC samples with BFs.

Vorheriger Artikel CFD Simulations of Fire Propagation in Horizontal Cable Trays Using a Pyrolysis Model with Stochastically Determined Geometry

Nächster Artikel Evaluation of Fire Models by Using Local and Global Metrics and Experimental Uncertainty Estimates: Application to OECD/NEA Prisme Door Tests

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Khaliq W, Kodur V (2013) Behavior of high strength fly ash concrete columns under fire conditions. Mater Struct 46:857–867. https://doi.org/10.1617/s11527-012-9938-7CrossRef

Bangi MR, Horiguchi T (2011) Pore pressure development in hybrid fibre-reinforced high strength concrete at elevated temperatures. Cem Concr Res 41:1150–1156. https://doi.org/10.1016/j.cemconres.2011.07.001CrossRef

Noumowe AN, Clastres P, Debicki G, Bolvin M (1994) High temperature effect on high performance concrete (70–600 C) strength and porosity. Spec Publ 145:157–172. https://doi.org/10.14359/4546CrossRef

Cheng F-P, Kodur VKR, Wang T-C (2004) Stress-strain curves for high strength concrete at elevated temperatures. J Mater Civ Eng 16:84–90. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:1(84)CrossRef

Gettu R, Bazant ZP, Karr ME (1990) Fracture properties and brittleness of high-strength concrete. ACI Mater J 87:608–618. https://doi.org/10.14359/2513CrossRef

Khaliq W, Waheed F (2017) Mechanical response and spalling sensitivity of air entrained high-strength concrete at elevated temperatures. Constr Build Mater 150:747–757. https://doi.org/10.1016/j.conbuildmat.2017.06.039CrossRef

Khaliq W, Mujeeb A (2019) Effect of processed pozzolans on residual mechanical properties and macrostructure of high-strength concrete at elevated temperatures. Struct Concr 20:307–317. https://doi.org/10.1002/suco.201800074CrossRef

Agrawal A, Materials VK (2019) Residual response of fire-damaged high-strength concrete beams. Fire Mater 43:310–322. https://doi.org/10.1002/fam.2702CrossRef

Kodur V, Concrete MD (2008) Effect of fire induced spalling on the response of reinforced concrete beams. Int J Concr Struct Mater 2:71–81. https://doi.org/10.4334/IJCSM.2008.2.2.071CrossRef

10.

Afzal MT, Khushnood RA (2021) Influence of carbon nano fibers (CNF) on the performance of high strength concrete exposed to elevated temperatures. Constr Build Mater 268:121108. https://doi.org/10.1016/j.conbuildmat.2020.121108CrossRef

11.

Yong C, Wang C-Y (1980) Thermally induced acoustic emission in westerly granite. Geophys Res Lett 7:1089–1092. https://doi.org/10.1029/GL007I012P01089CrossRef

12.

Behnood A, Ghandehari M (2009) Comparison of compressive and splitting tensile strength of high-strength concrete with and without polypropylene fibers heated to high temperatures. Fire Saf J 44:1015–1022. https://doi.org/10.1016/j.firesaf.2009.07.001CrossRef

13.

Phan LT, Carino NJ (1998) Review of mechanical properties of HSC at elevated temperature. J Mater Civ Eng 10:58–65. https://doi.org/10.1061/(ASCE)0899-1561(1998)10:1(58)CrossRef

14.

Kodur VKR (2004) Spalling in high strength concrete exposed to fire—concerns, causes, critical parameters and cures. Adv Technol Struct Eng 103:180. https://doi.org/10.1061/40492(2000)180CrossRef

15.

Bošnjak J, Sharma A, Grauf K (2019) Mechanical properties of concrete with steel and polypropylene fibres at elevated temperatures. Fibers 7:9. https://doi.org/10.3390/FIB7020009CrossRef

16.

Raza SS, Qureshi LA, Ali B (2020) Residual mechanical strength of glass fiber reinforced reactive powder concrete exposed to elevated temperatures. SN Appl Sci 2:1–11. https://doi.org/10.1007/s42452-020-03412-8CrossRef

17.

Ahmed W, Lim CW, Akbar A (2022) Influence of elevated temperatures on the mechanical performance of sustainable-fiber-reinforced recycled aggregate concrete: a review. Build 12:487. https://doi.org/10.3390/BUILDINGS12040487CrossRef

18.

Khaliq W, Kodur V (2018) Effectiveness of polypropylene and steel fibers in enhancing fire resistance of high-strength concrete columns. J Struct Eng 144:04017224. https://doi.org/10.1061/(asce)st.1943-541x.0001981CrossRef

19.

Ahmed W, Lim CW (2020) Production of sustainable and structural fiber reinforced recycled aggregate concrete with improved fracture properties: a review. J Clean Prod 279:1–42. https://doi.org/10.1016/j.jclepro.2020.123832CrossRef

20.

Mohamed Z, Belkacem L, Abdelhak K (2022) Fire resistance performance of glass fiber reinforced concrete columns. Lect Notes Civ Eng 203:275–283. https://doi.org/10.1007/978-981-16-7160-9_27/FIGURES/6CrossRef

21.

Yu Z, Lau D (2017) Evaluation on mechanical enhancement and fire resistance of carbon nanotube (CNT) reinforced concrete. Coupled Syst Mech 6:335–349

22.

Bastami M, Baghbadrani M, Aslani F (2014) Performance of nano-Silica modified high strength concrete at elevated temperatures. Constr Build Mater 68:402–408. https://doi.org/10.1016/j.conbuildmat.2014.06.026CrossRef

23.

Baloch WL, Khushnood RA, Khaliq W (2018) Influence of multi-walled carbon nanotubes on the residual performance of concrete exposed to high temperatures. Constr Build Mater 185:44–56. https://doi.org/10.1016/j.conbuildmat.2018.07.051CrossRef

24.

Nanni A (1991) Fatigue behaviour of steel fiber reinforced concrete. Cem Concr Compos 13:239–245. https://doi.org/10.1016/0958-9465(91)90029-HCrossRef

25.

Jiang C, Fan K, Wu F, Chen D (2014) Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete. Mater Des 58:187–193. https://doi.org/10.1016/j.matdes.2014.01.056CrossRef

26.

Ahmed W, Baloch WL, Khushnood RA (2020) Fire performance of concrete containing nano-fibers and graphite nano-particles. In: Smart nanoconcretes and cement-based materials. Elsevier, pp 297–311

27.

Singha K (2012) A short review on basalt fiber. Int J Text Sci 1:19–28. https://doi.org/10.5923/j.textile.20120104.02CrossRef

28.

Kizilkanat AB, Kabay N, Akyüncü V et al (2015) Mechanical properties and fracture behavior of basalt and glass fiber reinforced concrete: an experimental study. Constr Build Mater 100:218–224. https://doi.org/10.1016/j.conbuildmat.2015.10.006CrossRef

29.

Ahmed W, Lim CW (2021) Coupling effect assessment of vacuum based pozzolana slurry encrusted recycled aggregate and basalt fiber on mechanical performance of fiber reinforced concrete. Constr Build Mater 300:124032. https://doi.org/10.1016/j.conbuildmat.2021.124032CrossRef

30.

Di Ludovico M, Prota A, Manfredi G (2010) Structural upgrade using basalt fibers for concrete confinement. J Compos Constr 14:541–552. https://doi.org/10.1061/(asce)cc.1943-5614.0000114CrossRef

31.

Sim J, Park C, Moon DY (2005) Characteristics of basalt fiber as a strengthening material for concrete structures. Composites Part B 36:504–512. https://doi.org/10.1016/j.compositesb.2005.02.002CrossRef

32.

Deák T, Czigány T (2009) Chemical composition and mechanical properties of basalt and glass fibers: a comparison. Text Res J 79:645–651. https://doi.org/10.1177/0040517508095597CrossRef

33.

Ayub T, Shafiq N, Nuruddin MF (2014) Effect of chopped basalt fibers on the mechanical properties and microstructure of high performance fiber reinforced concrete. Adv Mater Sci Eng. https://doi.org/10.1155/2014/587686CrossRef

34.

Niu D, Su L, Luo Y et al (2020) Experimental study on mechanical properties and durability of basalt fiber reinforced coral aggregate concrete. Constr Build Mater 237:117628. https://doi.org/10.1016/J.CONBUILDMAT.2019.117628CrossRef

35.

Hassani Niaki M, Fereidoon A, Ghorbanzadeh Ahangari M (2018) Experimental study on the mechanical and thermal properties of basalt fiber and nanoclay reinforced polymer concrete. Compos Struct 191:231–238. https://doi.org/10.1016/j.compstruct.2018.02.063CrossRef

36.

Kou SC, Poon CS, Etxeberria M (2014) Residue strength, water absorption and pore size distributions of recycled aggregate concrete after exposure to elevated temperatures. Cem Concr Compos 53:73–82. https://doi.org/10.1016/j.cemconcomp.2014.06.001CrossRef

37.

Arioz O (2007) Effects of elevated temperatures on properties of concrete. Fire Saf J 42:516–522. https://doi.org/10.1016/j.firesaf.2007.01.003CrossRef

38.

Khaliq W, Kodur V (2011) Thermal and mechanical properties of fiber reinforced high performance self-consolidating concrete at elevated temperatures. Cem Concr Res 41:1112–1122. https://doi.org/10.1016/j.cemconres.2011.06.012CrossRef

39.

Ali F (2002) Is high strength concrete more susceptible to explosive spalliag than normal strength concrete in fire? Fire Mater 26:127–130. https://doi.org/10.1002/fam.791CrossRef

40.

ASTM C39/C39M (2015) ASTM C39 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. ASTM Int

41.

ASTM C496/C496M (2017) ASTM C496/C496M-17, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. ASTM International

42.

ASTM C469-02 (2017) Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression. In: ASTM Int. https://www.astm.org/c0469-02.html. Accessed 17 Feb 2022

43.

Schneider U, Felicetti R, Debicki G et al (2007) Recommendation of RILEM TC 200-HTC: mechanical concrete properties at high temperatures-modelling and applications: Part 1. General presentation. Mater Struct Constr 40:841–853. https://doi.org/10.1617/s11527-007-9285-2CrossRef

44.

Recommendation R, La RPD (1995) 129-MHT: test methods for mechanical properties of concrete at high temperatures. Mater Struct 28:410–414CrossRef

45.

Aseem A, Latif Baloch W, Khushnood RA, Mushtaq A (2019) Structural health assessment of fire damaged building using non-destructive testing and micro-graphical forensic analysis: a case study. Case Stud Constr Mater 11:e00258. https://doi.org/10.1016/j.cscm.2019.e00258CrossRef

46.

Shafiq N, Nuruddin MF, Elshekh AEA, Salih AFM (2014) Effect of chopped basalt fiber on the fresh and hardened properties of fly ash high strength concrete. Appl Mech Mater 567:381–386. https://doi.org/10.4028/WWW.SCIENTIFIC.NET/AMM.567.381CrossRef

47.

Khaliq W, Khan HA (2015) High temperature material properties of calcium aluminate cement concrete. Constr Build Mater 94:475–487. https://doi.org/10.1016/j.conbuildmat.2015.07.023CrossRef

48.

Yilmaz S, Özkan OT, Günay V (1996) Crystallization kinetics of basalt glass. Ceram Int 22:477–481. https://doi.org/10.1016/0272-8842(95)00118-2CrossRef

49.

Gutnikov SI, Manylov MS, Lipatov YV et al (2013) Effect of the reduction treatment on the basalt continuous fiber crystallization properties. J Non Cryst Solids 368:45–50. https://doi.org/10.1016/j.jnoncrysol.2013.03.007CrossRef

50.

Fiore V, Scalici T, Di Bella G, Valenza A (2015) A review on basalt fibre and its composites. Composites Part B 74:74–94. https://doi.org/10.1016/j.compositesb.2014.12.034CrossRef

51.

Tumadhir M (2013) Thermal and mechanical properties of basalt fibre reinforced concrete basalt fibre. World Acad Sci Eng Technol Int J Civ Environ Eng 7:334–337

52.

Heap MJ, Lavallée Y, Laumann A et al (2013) The influence of thermal-stressing (up to 1000 °c) on the physical, mechanical, and chemical properties of siliceous-aggregate, high-strength concrete. Constr Build Mater 42:248–265. https://doi.org/10.1016/j.conbuildmat.2013.01.020CrossRef

53.

Bažant ZP, Kaplan MF, Bazant ZP (1996) Concrete at high temperatures: material properties and mathematical models. Addison-Wesley, London, pp 343–354

54.

Castillo C, Durrani AJ (1990) Effect of transient high temperature on high-strength concrete. Mater J 87:47–53. https://doi.org/10.14359/2356CrossRef

55.

Narayanan A, Shanmugasundaram P (2018) Evaluation of heat resisting behaviour of basalt fibre reinforced FG tiles. Constr Build Mater 170:679–689. https://doi.org/10.1016/j.conbuildmat.2018.03.110CrossRef

56.

Behera P, Baheti V, Militky J, Louda P (2018) Elevated temperature properties of basalt microfibril filled geopolymer composites. Constr Build Mater 163:850–860. https://doi.org/10.1016/j.conbuildmat.2017.12.152CrossRef

57.

Chan YN, Peng GF, Anson M (1999) Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperatures. Cem Concr Compos 21:23–27. https://doi.org/10.1016/S0958-9465(98)00034-1CrossRef

58.

Yang J, Peng GF, Shui GS, Zhang G (2019) Mechanical properties and anti-spalling behavior of ultra-high performance concrete with recycled and industrial steel fibers. Materials 12:783. https://doi.org/10.3390/ma12050783CrossRef

59.

Smarzewski P (2019) Study of toughness and macro/micro-crack development of fibre-reinforced ultra-high performance concrete after exposure to elevated temperature. Materials 12:1210. https://doi.org/10.3390/ma12081210CrossRef

60.

Kodur V, Khaliq W (2010) Effect of temperature on thermal properties of different types of high-strength concrete. J Mater Civ Eng 23:793–801. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000225CrossRef

61.

Phan LT, Lawson JR, Davis FL (2001) Effects of elevated temperature exposure on heating characteristics, spalling, and residual properties of high performance concrete. Mater Struct Constr 34:83–91. https://doi.org/10.1007/bf02481556CrossRef

62.

Baloch WL, Khushnood RA, Memon SA et al (2018) Effect of elevated temperatures on mechanical performance of normal and lightweight concretes reinforced with carbon nanotubes. Fire Technol 54:1331–1367. https://doi.org/10.1007/s10694-018-0733-zCrossRef

Titel: An Experimental Investigation on Assessment of Residual Mechanical Performance of Basalt Fiber Reinforced High Strength Concrete at Elevated Temperature
verfasst von: Muhammad Talal Afzal
Rao Arsalan Khushnood
Wisal Ahmed
Publikationsdatum: 30.07.2022
Verlag: Springer US
Erschienen in: Fire Technology / Ausgabe 5/2022
Print ISSN: 0015-2684
Elektronische ISSN: 1572-8099
DOI: https://doi.org/10.1007/s10694-022-01279-2

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 5/2022

Reaction Mechanism of Lithium-Ion Battery Fire Extinguishing Agent-Perfluorinated Hexanone Oxidizes Metal-Al

Probabilistic Fire Simulation Assessment Using Simplified Model and Zone Modelling of a Kitchen Fire Scenario

Facile Preparation of Novel Carbon Microspheres for Improvement in Flame Retardancy, Smoke Suppression and Toxicity Reduction of Thermoplastic Polyurethane Elastomer

Identifying Thresholds for Observational Indicators of Enhanced Sonic Deposition on Smoke Alarms in Forensic Investigations

Analysis of Fire Throttling in Longitudinally Ventilated Tunnels With a One-dimensional Model

Experimental Investigation of Acoustic Agglomeration and Sonic Soot Deposition on Smoke Alarms Incorporating Emerging Sounding Technologies