nach oben

Physics of Metals and Metallography

Erschienen in:

29.12.2023 | STRENGTH AND PLASTICITY

Rate-Dependent Compressive Behaviour of SiC−B₄C−Al Hybrid Composites

verfasst von: Tulsi Chouhan, Manoj Soni

Erschienen in: Physics of Metals and Metallography | Ausgabe 13/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Effect of hybridization on the rate-dependent behaviour of Aluminum metal matrix composites (MMCs) comprising (0, 10, 20, and 30%) monolithic and hybrid SiC–B₄C were prepared by powder metallurgy technique and tested under quasi-static and dynamic compression. Split Hopkinson pressure bar results revealed diverse strain rates attained by MMCs. 30% SiC reinforcement of Al matrix resulted in 16.9% higher stress and 13.5% higher toughness compared to 30% B₄C reinforced MMC. Hybridizing 20% SiC–10% B₄C with Al-matrix resulted in 18.9% higher stress and 29.7% higher toughness compared to 30% B₄C reinforced MMC. Damage studies revealed how inverting hybrid particle reinforcement leads to improved mechanical performance.

Vorheriger Artikel Microstructure and Properties of Cu–Ti Alloys Prepared by Aluminothermic Reaction and Subsequent Rolling

Nächster Artikel Microstructural Evolution and Mechanical Behavior of SP-700Ti Alloy during Superplastic Deformation

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

S. Ghanaraja, K. L. V. Kumar, H. P. Raju, and K. S. Ravikumar, “Processing and mechanical properties of hot extruded Al(Mg)–Al₂O₃ composites,” Mater. Today: Proc. 2, 1291–1300 (2015). https://doi.org/10.1016/j.matpr.2015.07.045CrossRef

D. Patidar and R. S. Rana, “Effect of B₄C particle reinforcement on the various properties of aluminium matrix composites: A survey paper,” Mater. Today: Proc. 4, 2981–2988 (2017). https://doi.org/10.1016/j.matpr.2017.02.180CrossRef

B. V. Ramnath, C. Elanchezhian, R. Annamalai, S. Aravind, T. S. A. Atreya, V. Vignesh, and C. Subramanian, “Aluminium metal matrix composites-A review,” Rev. Adv. Mater. Sci. 38, 55–60 (2014).

A. Sharma, V. M. Sharma, S. Mewar, S. K. Pal, and J. Paul, “Friction stir processing of Al6061–SiC-graphite hybrid surface composites,” Mater. Manuf. Processes 33, 795–804 (2018). https://doi.org/10.1080/10426914.2017.1401726CrossRef

Ş. Karabulut, U. Gökmen, and H. Çinici, “Study on the mechanical and drilling properties of AA7039 composites reinforced with Al₂O₃/B₄C/SiC particles,” Compos. Part B: Eng. 93, 43–55 (2016). https://doi.org/10.1016/j.compositesb.2016.02.054CrossRef

P. Singh, N. R. Chauhan, and S. Rajesha, “Effect of the addition of ductile phase on mechanical properties of alumina/nano SiC ceramic composite,” Adv. Mater. Process. Technol. (2022). https://doi.org/10.1080/2374068x.2022.2120291

M. R. Allazadeh, M. K. Itani, and S. N. Wosu, “Compression of the material characteristics of steel, aluminum, wood and woven graphite epoxy composites in response to high strain rate load,” Adv. Mater. Sci. Appl. 1, 13–30 (2012). https://doi.org/10.5963/amsa0101003CrossRef

S. Prasad, H. Chouhan, K. Kartikeya, K. K. Singh, and N. Bhatnagar, “An experimental investigation into mechanical behaviour of Basalt PEI laminates at various strain rates,” Compos. Struct. 267, 113800 (2021). https://doi.org/10.1016/j.compstruct.2021.113800CrossRef

T. V. Knyazyuk, A. A. Zisman, N. S. Novoskol’tsev, and E. I. Khlusova, “Anomalous refinement of the austenite grain upon high-strain-rate hot deformation of microalloyed medium-carbon steel,” Phys. Met. Metallogr. 121, 543–547 (2020). https://doi.org/10.1134/s0031918x20060095ADSCrossRef

10.

Yo. Suo, Z. Deng, B. Wang, Ya. Gong, and P. Jia, “Constitutive model of metal matrix composites at high strain rates and its application,” Mater. Today Commun. 27, 102328 (2021). https://doi.org/10.1016/j.mtcomm.2021.102328CrossRef

11.

C. San Marchi, F. Cao, M. Kouzeli, and A. Mortensen, “Quasistatic and dynamic compression of aluminum-oxide particle reinforced pure aluminum,” Mater. Sci. Eng., A 337, 202–211 (2002). https://doi.org/10.1016/S0921-5093(02)00035-7CrossRef

12.

H. Zhang, K. T. Ramesh, and E. S. C. Chin, “High strain rate response of aluminum 6092/B₄C composites,” Mater. Sci. Eng., A 384, 26–34 (2004). https://doi.org/10.1016/j.msea.2004.05.027CrossRef

13.

B. Liu, W. Huang, H. Wang, M. Wang, and X. Li, “Compressive behavior of high particle content B₄C/Al composite at elevated temperature,” Trans. Nonferrous Met. Soc. China 23, 2826–2832 (2013). https://doi.org/10.1016/s1003-6326(13)62803-4CrossRef

14.

J. Zhang, H. Shi, M. Cai, L. Liu, and P. Zhai, “The dynamic properties of SiCp/Al composites fabricated by spark plasma sintering with powders prepared by mechanical alloying process,” Mater. Sci. Eng., A 527, 218–224 (2009). https://doi.org/10.1016/j.msea.2009.08.067CrossRef

15.

Z. H. Tan, B. J. Pang, D. T. Qin, J. Y. Shi, and B. Z. Gai, “The compressive properties of 2024Al matrix composites reinforced with high content SiC particles at various strain rates,” Mater. Sci. Eng., A 489, 302–309 (2008). https://doi.org/10.1016/j.msea.2007.12.021CrossRef

16.

H. Lee, S. S. Sohn, C. Jeon, I. Jo, S.-K. Lee, and S. Lee, “Dynamic compressive deformation behavior of SiC-particulate-reinforced A356 Al alloy matrix composites fabricated by liquid pressing process,” Mater. Sci. Eng., A 680, 368–377 (2017). https://doi.org/10.1016/j.msea.2016.10.102CrossRef

17.

A. N. Petrova, I. G. Brodova, S. V. Razorenov, E. V. Shorokhov, and T. K. Akopyan, “Mechanical properties of the Al–Zn–Mg–Fe–Ni alloy of eutectic type at different strain rates,” Phys. Met. Metallogr. 120, 1221–1227 (2019). https://doi.org/10.1134/s0031918x19120135ADSCrossRef

18.

A. K. Bodukuri, K. Eswaraiah, K. Rajendar, and V. Sampath, “Fabrication of Al–SiC–B₄C metal matrix composite by powder metallurgy technique and evaluating mechanical properties,” Perspect. Sci. 8, 428–431 (2016). https://doi.org/10.1016/j.pisc.2016.04.096CrossRef

19.

S. Krishnakumar and T. Senthilvelan, “Experimental analysis on the flow properties of Al–B₄C, Al–TiO₂ composites produced by P/M process,” Mater. Today: Proc. 5, 11585–11592 (2018). https://doi.org/10.1016/j.matpr.2018.02.127CrossRef

20.

D. Bommana, T. R. K. Dora, N. P. Senapati, and A. S. Kumar, “Effect of 6 wt % particle (B₄C + SiC) reinforcement on mechanical properties of AA6061 aluminum hybrid MMC,” Silicon 14, 4197–4206 (2022). https://doi.org/10.1007/s12633-021-01210-4CrossRef

21.

B. A. Gama, S. L. Lopatnikov, and J. W. J. Gillespie, “Hopkinson bar experimental technique: A critical review,” Appl. Mech. Rev. 57, 223–250 (2014). https://doi.org/10.1115/1.1704626ADSCrossRef

22.

H. Chouhan, N. A. Bhalla, and N. Bhatnagar, “High strain rate performance of UHMWPE composites: Effect of moisture ingress and egress,” Mater. Today Commun. 26, 101709 (2021). https://doi.org/10.1016/j.mtcomm.2020.101709CrossRef

23.

H. Chouhan, N. A. Bhalla, A. K. Bandaru, S. A. Gebremeskel, and N. Bhatnagar, “Quasi-static and high strain rate response of Kevlar reinforced thermoplastics,” Polym. Test. 93, 106964 (2021). https://doi.org/10.1016/j.polymertesting.2020.106964CrossRef

24.

A. K. Bandaru, H. Chouhan, S. Prasad, P. M. Weaver, N. Bhatnagar, and R. O’Higgins, “Effect of weave pattern on high strain rate performance of glass polytetrafluoroethylene composites,” Polym. Compos. 43, 1809–1822 (2021). https://doi.org/10.1002/pc.26499CrossRef

25.

N. K. Naik, P. J. Shankar, V. R. Kavala, G. Ravikumar, J. R. Pothnis, and H. Arya, “High strain rate mechanical behavior of epoxy under compressive loading: Experimental and modeling studies,” Mater. Sci. Eng., A 528, 846–854 (2011). https://doi.org/10.1016/j.msea.2010.10.099CrossRef

26.

D. Lehmhus, J. Weise, J. Baumeister, L. Peroni, M. Scapin, C. Fichera, M. Avalle, and M. Busse, “Quasi-static and dynamic mechanical performance of glass microsphere- and cenosphere-based 316L syntactic foams,” Procedia Mater. Sci. 4, 383–387 (2014). https://doi.org/10.1016/j.mspro.2014.07.578CrossRef

27.

D. J. Lloyd, “Particle reinforced aluminium and magnesium matrix composites,” Int. Mater. Rev. 39, 1–23 (1994). https://doi.org/10.1179/imr.1994.39.1.1CrossRef

28.

A. G. Evans, J. W. Hutchinson, and R. M. Mcmeeking, “Stress-strain behavior of metal matrix composites with discontinuous reinforcements,” Scr. Metall. Mater. 25, 3–8 (1991). https://doi.org/10.1016/0956-716x(91)90344-zCrossRef

Titel: Rate-Dependent Compressive Behaviour of SiC−B4C−Al Hybrid Composites
verfasst von: Tulsi Chouhan
Manoj Soni
Publikationsdatum: 29.12.2023
Verlag: Pleiades Publishing
Erschienen in: Physics of Metals and Metallography / Ausgabe 13/2023
Print ISSN: 0031-918X
Elektronische ISSN: 1555-6190
DOI: https://doi.org/10.1134/S0031918X22601688

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 13/2023

Research on the Choice of Cooling Method for a Rare-Earth Wrought Magnesium Alloy Considering Temperature Distribution, Hardness and Microstructure

Microstructure and Properties of Cu–Ti Alloys Prepared by Aluminothermic Reaction and Subsequent Rolling

An Atomistic Structure of Cementite (M3C, M = Fe, Cr, Mn) in Carbon Steel

Microstructure and Texture of Ultra-High Purity Copper under Changed Rolling Strain Paths and Subsequent Recrystallization Annealing

Effect of Phase Formation on Mechanical Properties of the Joint AA6061 to AA2024 by TLP

Comparative Study of Structural and Opto-Electric Features of Environment Friendly AlSb Screen Printed and Brush Plated Films