nach oben

Erschienen in:

2024 | OriginalPaper | Buchkapitel

Seismic Retrofitting and Strengthening of Structures

verfasst von : Pranoy Debnath, Sekhar Chandra Dutta

Erschienen in: RC Structures Strengthened with FRP for Earthquake Resistance

Verlag: Springer Nature Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Retrofitting the seismically damaged structures and strengthening the existing structures due to the upgradation of seismic zones continuously taking place. In fact, learning from occurring earthquakes and study of structural damages has become a very important aspect of earthquake engineering. Most of the developing countries have large numbers of habitats made of masonry, while the focus on the safety of these poor men’s habitats is relatively very less. Developing countries can also afford concrete structures for dwellings, while steel structures are mostly used for industrial purposes. On the other hand, the developed countries have large numbers of steel structures as well as shear wall based structures as they can afford the cost of the same. To have a comprehensive idea about retrofitting and strengthening measures for all categorial structures, the current chapter is an attempt to bring together the existing techniques for retrofitting and strengthening all the structures under separate subheadings and also underlines the promising new techniques which are coming up for this purpose. At the end, the chapter summarizes a few important points on this aspect. The chapter may be helpful for having an overall picture of the retrofitting and strengthening of structures.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Seismic Strengthening and Retrofitting of RC Structures Using Fibre Reinforced Composites

Nächstes Kapitel Seismic Retrofit of Reinforced Concrete Structures Using Fibre Reinforced Polymer

Adhikary S das, Li B, Fujikake K (2014) Effects of high loading rate on reinforced concrete beams (with Appendix). Struct J 111:651–660. https://doi.org/10.14359/51686579

AISC (2022) Code of standard practice for steel buildings and bridges

Alba-Rodríguez MD, Martínez-Rocamora A, González-Vallejo P et al (2017) Building rehabilitation versus demolition and new construction: economic and environmental assessment. Environ Impact Assess Rev 66:115–126. https://doi.org/10.1016/j.eiar.2017.06.002CrossRef

Alcaino P, Maria HS (2008) Experimental response of externally retrofitted masonry walls subjected to shear loading. J Compos Constr 12:489–498. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:5(489)CrossRef

Ali MSM, Oehlers DJ, Bradford MA (2001) Shear peeling of steel plates bonded to tension faces of RC beams. J Struct Eng (ASCE) 127:1453–1459CrossRef

Ali Q, Khan AN, Ashraf M et al (2013) Seismic performance of stone masonry buildings used in the Himalayan belt. Earthq Spectra 29:1159–1181. https://doi.org/10.1193/091711EQS228MCrossRef

Anastasiadis A (2021) Failure of steel structures: rethinking some of the aftermaths. Urbanism Arhitectură Construcţii 12(2).

Angst UM (2018) Challenges and opportunities in corrosion of steel in concrete. Mater Struct/Materiaux et Constructions 51:1–20. https://doi.org/10.1617/S11527-017-1131-6/FIGURES/6CrossRef

Anwar M, Roushdi M (2013) Improved concrete properties to resist the saline water using environmental by-product. Water Sci 27:30–38. https://doi.org/10.1016/J.WSJ.2013.12.003CrossRef

10.

Apostolopoulos C, Koulouris K (2021) Corrosion effects on durability of RC structures. Metals 11:1812. https://doi.org/10.3390/MET11111812

11.

Aprile A, Spacone E, Member A, Limkatanyu S (2001) Role of bond in RC beams strengthened with steel and FRP plates. J Struct Eng (ASCE) 127:1445–1452CrossRef

12.

ASCE/SEI 41-06 (2007) Seismic rehabilitation of existing buildings. American Society of Civil Engineers

13.

Astaneh-Asl A, Qian X, Shi Y (2019) Application of steel shear walls toward more resilient structures. In: Resilient structures and infrastructure. Springer, Singapore, pp 3–46

14.

Ates S, Kahya V, Yurdakul M, Adanur S (2013) Damages on reinforced concrete buildings due to consecutive earthquakes in Van. Soil Dyn Earthq Eng 53:109–118. https://doi.org/10.1016/j.soildyn.2013.06.006CrossRef

15.

Aydenlou RM (2020a) Types of existing buildings: detailed introduction and seismic rehabilitation. In: Seismic rehabilitation methods for existing buildings. Elsevier, pp 193–553

16.

Aydenlou RM (2020b) Seismic rehabilitation methods for existing buildings. Elsevier

17.

Baltazar LG, Henriques FMA, Cidade MT (2019) Rheology of natural hydraulic lime grouts for conservation of stone masonry-influence of compositional and processing parameters. Fluids 4

18.

Banerjee S, Nayak S, Das S (2018) Enhancing shear capacity of masonry wallet using PP-band and steel wire mesh. IOP Conf Ser Mater Sci Eng 431:072004. https://doi.org/10.1088/1757-899X/431/7/072004CrossRef

19.

Banerjee S, Nayak S, Das S (2021) Seismic performance enhancement of masonry building models strengthened with the cost-effective materials under bi-directional excitation. Eng Struct 242. https://doi.org/10.1016/j.engstruct.2021.112516

20.

Banerjee S, Nayak S, Das S (2020a) Shear and flexural behaviour of unreinforced masonry wallets with steel wire mesh. J Build Eng 30. https://doi.org/10.1016/j.jobe.2020.101254

21.

Banerjee S, Nayak S, Das S (2020) Improving the In-plane behavior of brick masonry wallet using PP band and steel wire mesh. J Mater Civ Eng 32:04020132. https://doi.org/10.1061/(asce)mt.1943-5533.0003159CrossRef

22.

Banerjee S, Nayak S, Das S (2019) Enhancing the flexural behaviour of masonry wallet using PP band and steel wire mesh. Constr Build Mater 194:179–191. https://doi.org/10.1016/j.conbuildmat.2018.11.001CrossRef

23.

Bano S, Jaiswal G, Kumar R, Tiwari A, Karthikeyan M (2023) Experimental Study on the crack repair techniques of concrete structures: a case study. IOP Conf Ser Mater Sci Eng 1273:012006. https://doi.org/10.1088/1757-899X/1273/1/012006CrossRef

24.

Bartolomé AS, Quiun D, Zegarra L. (2008) Performance of reinforced adobe houses in Pisco, Peru earthquake. In: Proceedings of the 14th world conference on earthquake engineering. Beijing, China

25.

Bernam JW, Bruneau M (2004) Steel plate shear walls are not plate girders. AISC Eng J 95

26.

Bernardo G, Guida A, Mecca I (2015) Advancements in shotcrete technology. In: Structural studies, repairs and maintenance of heritage architecture XIV. WIT Press, pp 591–602

27.

Blokley DI (1980) The nature of structural design and Safety. Ellis Horwood, London

28.

Blondet M, Torrealva D, Vargas J, Velasquez J, Tarque J (2006) Seismic reinforcement of adobe houses using external polymer mesh. In: First European conference on earthquake engineering and seismology, Paper no. 632

29.

Bosio M, di Salvatore C, Bellotti D, Capacci L, Belleri A, Piccolo V, Cavalieri F, Lago BD, Riva P, Magliulo G, Nascimbene R, Biondini F (2022) Modelling and seismic response analysis of non-residential single-storey existing precast buildings in Italy. J Earthquake Eng. https://doi.org/10.1080/13632469.2022.2033364CrossRef

30.

Bostenaru Dan MD (2004) Multi-criteria decision model for retrofitting existing buildings. Nat Hazards Earth Syst Sci 4:485–499. https://doi.org/10.5194/NHESS-4-485-2004CrossRef

31.

Bradshaw A, Rajeev P, Tesfamariam S (2011) Multi Criteria decision making tool for the selection of seismic retrofitting techniques. In: Australian earthquake engineering society conference. Barossa Valley, South Australia

32.

Braga F, Gigliotti R, Monti G, Morelli F, Nuti C, Salvatore W, Vanzi I (2014) Speedup of post earthquake community recovery: the case of precast industrial buildings after the Emilia 2012 earthquake. Bull Earthq Eng 12:2405–2418. https://doi.org/10.1007/s10518-014-9583-3CrossRef

33.

Bruneau M (2004) Seismic retrofit of steel structures. Sociedad Mexicana de Ingeniera Sismica, VIII SNIS, Tlaxcala

34.

Bush TD, Wyllie LA, Jirsa JO (1991) Observations on two seismic strengthening schemes for concrete frames. Earthq Spectra 7:511–527. https://doi.org/10.1193/1.1585640CrossRef

35.

Calderini C, Cattari S, Lagomarsino S (2010) The use of the diagonal compression test to identify the shear mechanical parameters of masonry. Constr Build Mater 24:677–685. https://doi.org/10.1016/J.CONBUILDMAT.2009.11.001CrossRef

36.

Calderoni B, Cordasco EA, del Zoppo M, Prota A (2020) Damage assessment of modern masonry buildings after the L’Aquila earthquake. Bull Earthq Eng 18:2275–2301. https://doi.org/10.1007/s10518-020-00784-5CrossRef

37.

California University (1976) State-of-the-art review on shotcrete

38.

Canbay E, Ersoy U, Ozcebe G (2003) Contribution of reinforced concrete infills to seismic behavior of structural systems. ACI Struct J 100:637–643. https://doi.org/10.14359/12805

39.

Cancellara D, de Angelis F (2016) Nonlinear dynamic analysis for multi-storey RC structures with hybrid base isolation systems in presence of bi-directional ground motions. Compos Struct 154:464–492. https://doi.org/10.1016/j.compstruct.2016.07.030CrossRef

40.

Carden L, Itani A, Buckle I, Aiken I (2004) Buckling restrained braces for ductile end cross frames in steel plate girder bridges. In: 13th world conference on earthquake engineering. Vancouver, B.C., Canada

41.

Caterino N, Iervolino I, Manfredi G, Cosenza E (2009) Comparative analysis of multi-criteria decision-making methods for seismic structural retrofitting. Comput-Aided Civil Infrastruct Eng 24:432–445. https://doi.org/10.1111/j.1467-8667.2009.00599.xCrossRef

42.

Chen SJ, Lin HY (1990) Experimental study of steel I-beam to box-column moment connection, 41–7. In: 4th international conference on steel structures and space frames

43.

Christopoulos C, Filiatrault A, Uang CM (2002) Self-centering post-tensioned energy dissipating (PTED) steel frames for seismic regions. San Diego, La Jolla, CA, p 292

44.

Corradi M, Borri A, Vignoli A (2002) Strengthening techniques tested on masonry structures struck by the Umbria–Marche earthquake of 1997–1998. Constr Build Mater 16:229–239. https://doi.org/10.1016/S0950-0618(02)00014-4CrossRef

45.

CPWD (2007) Handbook on repair and rehabilitation of RCC buildings. Delhi

46.

Crawford JE (2002) Retrofit methods to mitigate progressive collapse, karagozian and case structural engineers, Glendale, CA

47.

Dauda JA, Silva LC, Lourenço PB, Iuorio O (2021) Out-of-plane loaded masonry walls retrofitted with oriented strand boards: numerical analysis and influencing parameters. Eng Struct 243:112683. https://doi.org/10.1016/J.ENGSTRUCT.2021.112683CrossRef

48.

Debnath P, Chandra Dutta S, Mandal P (2023) Lateral behaviour of masonry walls with different types of brick bonds, aspect ratio and strengthening measures by polypropylene bands and wire mesh. Structures 49. https://doi.org/10.1016/j.istruc.2023.01.155

49.

Debnath P, Halder L, Dutta SC (2022) Damage survey and seismic vulnerability assessment of unreinforced masonry structures in low-intensity Ambasa earthquake of northeast India. Structures 44:372–388. https://doi.org/10.1016/j.istruc.2022.08.005CrossRef

50.

Dowling D, Samali B, Li J (2005) An Improved means of reinforcing adobe walls-external vertical reinforcement. In: SismoAdobe. Lima, Peru

51.

Dutta SC, Halder L, Sharma RP (2021) Seismic vulnerability assessment of low to mid-rise RC buildings addressing prevailing design and construction practices in the Northeastern region of the Indian subcontinent: a case study based approach. Structures 33:1561–1577. https://doi.org/10.1016/j.istruc.2021.05.032CrossRef

52.

Dutta SC, Mukhopadhyay P, Goswami K (2013) Augmenting strength of collapsed unreinforced masonry junctions: principal damage feature of walls damaged by moderate Indian earthquakes. Nat Hazards Rev 14:281–285. https://doi.org/10.1061/(ASCE)NH.1527-6996.0000096CrossRef

53.

Dutta SC, Mukhopadhyay PS, Saha R, Nayak S (2015) 2011 Sikkim earthquake at eastern himalayas: lessons learnt from performance of structures. Soil Dyn Earthq Eng 75:121–129. https://doi.org/10.1016/j.soildyn.2015.03.020CrossRef

54.

Dutta SC, Nayak S, Acharjee G, Panda SK, Das PK (2016) Gorkha (Nepal) earthquake of April 25, 2015: actual damage, retrofitting measures and prediction by RVS for a few typical structures. Soil Dyn Earthq Eng 89:171–184. https://doi.org/10.1016/j.soildyn.2016.08.010CrossRef

55.

Dutta SC, Nayak S, Dinakar P (2014) Lateral period and seismic vulnerability of masonry buildings. Proc Inst Civ Eng Struct Build 167:633–645. https://doi.org/10.1680/stbu.12.00043CrossRef

56.

Eatherton MR, Hajjar JF, Deierlein GG, Krawinkler H, Billington S, Ma X (2008) Controlled rocking of steel-framed buildings with replaceable energy-dissipating fuses. In: 14th world conference on earthquake engineering. Beijing, China

57.

Ehsani MR, Saadatmanesh H, Velazquez-Dimas JI (1999) Behavior of retrofitted URM walls under simulated earthquake loading. J Compos Constr 3:134–142. https://doi.org/10.1061/(ASCE)1090-0268(1999)3:3(134)CrossRef

58.

El-Dakhakhni WW, Hamid AA, Hakam ZHR, Elgaaly M (2006) Hazard mitigation and strengthening of unreinforced masonry walls using composites. Compos Struct 73:458–477. https://doi.org/10.1016/J.COMPSTRUCT.2005.02.017CrossRef

59.

Elgawady M, Lestuzzi P, Badoux M (2004) A review of conventional seismic retrofitting techniques for URM. In: 13th international brick and block masonry conference. Amsterdam

60.

Elgawady MA, Lestuzzi P, Badoux M (2006) Retrofitting of masonry walls using shotcrete. In: NZSEE conference, Paper 45

61.

Fazli H, Wee T (2014) Rehabilitation of RC structures exposed to salinity and moisture using CFRP. Appl Mech Mater 567:488–493. https://doi.org/10.4028/WWW.SCIENTIFIC.NET/AMM.567.488CrossRef

62.

FEMA 273 (1997) NEHRP guidelines for the seismic rehabilitation of buildings

63.

FEMA 351 (2000) Recommended seismic evaluation and upgrade criteria for existing welded steel moment-frame buildings.

64.

FEMA 547 (2006) Techniques for the seismic rehabilitation of existing buildings. Washington DC, USA

65.

Fillitsa Karantoni BV, Fardis MN (1992) Effectiveness of seismic strengthening techniques for masonry buildings. J Struct Eng 118:1884–1902. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:7(1884)

66.

Formisano A, Di Lorenzo G, Landolfo R (2019) Seismic retrofitting of industrial steel buildings hit by the 2012 Emilia-Romagna earthquake: a case study. In: AIP conference proceedings. American Institute of Physics Inc.

67.

Garlock M, Ricles JM, Sause R (2004) Experimental studies on full-scale post-tensioned steel moment connections. In: 13th world conference on earthquake engineering. Vancouver, B.C., Canada

68.

Gattulli V, Lampis G, Marcari G, Paolone A (2014) Simulations of FRP reinforcement in masonry panels and application to a historic facade. Eng Struct 75:604–618. https://doi.org/10.1016/J.ENGSTRUCT.2014.06.023CrossRef

69.

Ghobadi MS, Ghassemieh M, Mazroi A, Abolmaali A (2009) Seismic performance of ductile welded connections using T-stiffener. J Constr Steel Res 65:766–775. https://doi.org/10.1016/j.jcsr.2008.05.007CrossRef

70.

Gilmore AT, Bertero VV, Youssef NFG (1996) Seismic rehabilitation of infilled non‐ductile frame buildings using post‐tensioned steel braces. Earthq Spectra 12:863–882

71.

Gilstrap JM, Dolan CW (1998) Out-of-plane bending of FRP-reinforced masonry walls. Compos Sci Technol 58:1277–1284. https://doi.org/10.1016/S0266-3538(98)00007-4CrossRef

72.

Görgülü T, Tama YS, Yilmaz S et al (2012) Strengthening of reinforced concrete structures with external steel shear walls. J Constr Steel Res 70:226–235. https://doi.org/10.1016/J.JCSR.2011.08.010CrossRef

73.

Gusta S (2015) Tragedy in zolitude—a lesson for contemporary society. Aleksandras Stulginskis University

74.

Halder L, Dutta SC, Debnath P, Sharma RP (2021a) Seismic vulnerability assessment of low-rise unreinforced masonry buildings in Northeast India considering variability of material properties. Asian J Civil Eng 22:843–863. https://doi.org/10.1007/s42107-021-00350-7

75.

Halder L, Dutta SC, Sharma RP (2020) Damage study and seismic vulnerability assessment of existing masonry buildings in Northeast India. J Build Eng 29. https://doi.org/10.1016/j.jobe.2020.101190

76.

Halder L, Dutta SC, Sharma RP, Bhattacharya S (2021b) Lessons learnt from post-earthquake damage study of Northeast India and Nepal during last ten years: 2021 Assam earthquake, 2020 Mizoram earthquake, 2017 Ambasa earthquake, 2016 Manipur earthquake, 2015 Nepal earthquake, and 2011 Sikkim earthquake. Soil Dyn Earthq Eng 151. https://doi.org/10.1016/j.soildyn.2021.106990

77.

Hamed E, Rabinovitch O (2010) Failure characteristics of FRP-strengthened masonry walls under out-of-plane loads. Eng Struct 32:2134–2145. https://doi.org/10.1016/J.ENGSTRUCT.2010.03.016CrossRef

78.

Harris JR, Price HJ, Hutchinson DA, et al (2008) NEHRP workshop on meeting the challenges of existing buildings

79.

Hernández ET, Carrera JSG (2020) Damage assessment and seismic behavior of steel buildings during the Mexico earthquake of 19 September 2017. Earthq Spectra 36:250–270. https://doi.org/10.1177/8755293019878186CrossRef

80.

Huang KF, la Liu X (2014) Effects of temperature variations on safety of reinforced concrete structures during construction. J Shanghai Jiaotong Univ Sci 19:139–145. https://doi.org/10.1007/S12204-014-1482-X/METRICSCrossRef

81.

Iqbal S, Islam N (2022) Seismic base isolation of 7 storey RC structure using single friction pendulum system. Struct Int 27:200–209. https://doi.org/10.1007/978-3-031-04793-0_15/COVERCrossRef

82.

IS 4326 (1993) Earthquake resistant design and construction of buildings-code of practice (Second Revision). New Delhi

83.

IS 13827 (1993) Improving earthquake resistance of earthen buildings—guidelines. New Delhi

84.

IS 13828 (1993) Improving earthquake resistance of low strength masonry buildings—guidelines. New Delhi.

85.

IS 13920 (1993) Ductile detailing of reinforced concrete structures subjected to seismic forces—code of practice. New Delhi

86.

IS 13935 (2009) Seismic evaluation, repair and strengthening of masonry buildings—guidelines. New Delhi

87.

Islam ABMS, Jumaat MZ, Ahmmad R, ud Darain KM (2015) Retrofitting of vulnerable RC structures by base isolation technique. Earthq Struct 9:603–623. https://doi.org/10.12989/EAS.2015.9.3.603

88.

Ismail M, Muhammad B, Ismail MEG (2010) Compressive strength loss and reinforcement degradations of reinforced concrete structure due to long-term exposure. Constr Build Mater 24:898–902. https://doi.org/10.1016/J.CONBUILDMAT.2009.12.003CrossRef

89.

Ismail N, Khattak N (2015) Reconnaissance report on the Mw 7.5 Hindu Kush earthquake of 26th October 2015 and the subsequent aftershocks

90.

Issa CA, Debs P (2007) Experimental study of epoxy repairing of cracks in concrete. Constr Build Mater 21:157–163. https://doi.org/10.1016/j.conbuildmat.2005.06.030CrossRef

91.

Kahn L (1984) Shotcrete retrofit for unreinforced brick masonry. In: 8th WCEE. USA, pp 583–590

92.

Kamde DK, Pillai RG (2020) Effect of sunlight/ultraviolet exposure on the corrosion of Fusion-Bonded Epoxy (FBE) coated steel rebars in concrete. Corrosion 76:843–860. https://doi.org/10.5006/3588CrossRef

93.

Kaplan H, Yilmaz S, Nohutcu H et al (2008) Experimental study on the use of old tyres for seismic strengthening of masonry structures. In: 14th world conference on earthquake engineering. Beijing, China

94.

Karapetrou ST, Fotopoulou SD, Pitilakis KD (2017) Seismic vulnerability of RC buildings under the effect of aging. Procedia Environ Sci 38:461–468. https://doi.org/10.1016/j.proenv.2017.03.137CrossRef

95.

Karayannis CG, Chalioris CE, Sideris KK (1998) Effectiveness of RC beam-column connection repair using epoxy resin injections. J Earthquake Eng 2:217–240. https://doi.org/10.1080/13632469809350320CrossRef

96.

Karic A, Atalić J, Kolbitsch A (2022) Seismic vulnerability of historic brick masonry buildings in Vienna. Bull Earthq Eng 20:4117–4145. https://doi.org/10.1007/s10518-022-01367-2CrossRef

97.

Khabit IF, Mahin SA, Pister KS (1998) Seismic behavior of concentrically braced steel frames. Report No UCB/EERC-88/01. Earthquake Engineering Research Center, University of California, Berkeley

98.

Kiamanesh R, Abolmaali A, Ghassemieh M (2010) The effect of stiffeners on the strain patterns of the welded connection zone. J Constr Steel Res 66:19–27. https://doi.org/10.1016/j.jcsr.2009.07.010CrossRef

99.

Korany Y, Drysdale R (2006) Rehabilitation of masonry walls using unobtrusive FRP techniques for enhanced out-of-plane seismic resistance. J Compos Constr 10:213–222. https://doi.org/10.1061/(ASCE)1090-0268(2006)10:3(213)CrossRef

100.

Krauss PD, Scanlon JM, Hanson MA (1995) Evaluation of injection materials for the repair of deep cracks in concrete structures

101.

Kumar GR, Satish Kumar SR, Kalyanaraman V (2007) Behaviour of frames with Non-Buckling bracings under earthquake loading. J Constr Steel Res 63:254–262. https://doi.org/10.1016/j.jcsr.2006.04.012CrossRef

102.

Kuzik MD, Elwi AE, Cheng JJR (2003) Cyclic flexure tests of masonry walls reinforced with glass fiber reinforced polymer sheets. J Compos Constr 7:20–30. https://doi.org/10.1061/(ASCE)1090-0268(2003)7:1(20)CrossRef

103.

Leelataviwat S (1998) Drift and yield mechanism based seismic design and upgrading of steel moment frames

104.

Leon RT, Yang C-S (2003) Special inverted-v-braced frames with suspended zipper struts. Georgia Institute of Technology

105.

Li A, Assih T, Delmas Y (2000) Influence of the adhesive thickness and steel plate thickness on the behaviour of strengthened concrete beams. J Adhes Sci Technol 14:1639–1656. https://doi.org/10.1163/156856100742456CrossRef

106.

Li P, Zhou Z, Chen L, et al (2019) Research on dust suppression technology of shotcrete based on new spray equipment and process optimization. Adv Civil Eng. https://doi.org/10.1155/2019/4831215

107.

Lieping YE, Zhe QU (2009) Failure mechanism and its control of building structures under earthquakes based on structural system concept

108.

Liu H, Wang X, Jiao Y (2016) Effect of temperature variation on modal frequency of reinforced concrete slab and beam in cold regions. Shock Vib. https://doi.org/10.1155/2016/4792786

109.

LRFD (1999) Specification for structural steel buildings

110.

Lu Y (2019) Impact on reinforced concrete structures. Encycl Continuum Mech 1–24. https://doi.org/10.1007/978-3-662-53605-6_227-1

111.

Ma P, Xin R, Yao J (2021) Assessment of failure mode and seismic performance of damaged masonry structures retrofitted with grout-injected ferrocement overlay reinforcement (GFOR). Constr Build Mater 305:124778. https://doi.org/10.1016/J.CONBUILDMAT.2021.124778CrossRef

112.

Maalej M, Lin VWJ, Nguyen MP, Quek ST (2010) Engineered cementitious composites for effective strengthening of unreinforced masonry walls. Eng Struct 32:2432–2439. https://doi.org/10.1016/J.ENGSTRUCT.2010.04.017CrossRef

113.

Macabuag J (2007) An introduction to modelling and retrofitting of non-engineered masonry buildings under seismic loading

114.

Macabuag J, Guragain R, Bhattacharya S (2012) Seismic retrofitting of non-engineered masonry in rural Nepal. Proc Inst Civ Eng Struct Build 165:273–286. https://doi.org/10.1680/stbu.10.00015CrossRef

115.

Man L (2008) Improving the earthquake resistance of non-engineered adobe masonry buildings. Oxford University

116.

Mardani A, Dehkordi MR, Moghadam AS, Yekrangnia M (2018) Example of a two-story unreinforced masonry building retrofitted by shotcrete. In: Advanced design examples of seismic retrofit of structures. Elsevier, pp 13–118

117.

Masri AC, Goel SC (1996) Seismic design and testing of an RC slab-column frame strengthened by steel bracing. Earthq Spectra 12:645–666CrossRef

118.

Michiels T, Adriaenssens S, Dejong M (2019) Form finding of corrugated shell structures for seismic design and validation using non-linear pushover analysis. Eng Struct 181:362–373. https://doi.org/10.1016/J.ENGSTRUCT.2018.12.043CrossRef

119.

Michiels T, Adriaenssens S, Jorquera-Lucerga JJ (2017) Parametric study of masonry shells form-found for seismic loading. J Int Assoc Shell Spatial Struct 58:267–275. https://doi.org/10.20898/J.IASS.2017.194.892

120.

Mosallam AS (2007) Out-of-plane flexural behavior of unreinforced red brick walls strengthened with FRP composites. Compos B Eng 38:559–574. https://doi.org/10.1016/J.COMPOSITESB.2006.07.019CrossRef

121.

Moudi M, Yan S, Bahador B et al (2019) Statistical model for earthquake economic loss estimation using GDP and DPI: a case study from Iran. Qual Quant 53:583–598. https://doi.org/10.1007/s11135-018-0776-8

122.

Mulas MG, Perotti F, Coronelli D et al (2013) The partial collapse of “Casa dello Studente” during L’Aquila 2009 earthquake. Eng Fail Anal 34:566–584. https://doi.org/10.1016/j.engfailanal.2013.02.031CrossRef

123.

Narayan S, Shrimali MK, Bharti SD, Datta TK (2018) Collapse of damaged steel building frames because of earthquakes. J Perform Constructed Facil 32. https://doi.org/10.1061/(asce)cf.1943-5509.0001125

124.

Nayak S, Banerjee S, Das S (2018) Augmenting out-of-plane behaviour of masonry wallet using PP-band and steel wire mesh. In: IOP conference series: materials science and engineering. Institute of Physics Publishing

125.

Nayak S, Dutta SC (2016) Improving seismic performance of masonry structures with openings by polypropylene bands and L-shaped reinforcing bars. J Perform Constr Facil 30:04015003. https://doi.org/10.1061/(asce)cf.1943-5509.0000733CrossRef

126.

Nayak S, Dutta SC (2016) Failure of masonry structures in earthquake: a few simple cost effective techniques as possible solutions. Eng Struct 106:53–67. https://doi.org/10.1016/j.engstruct.2015.10.014CrossRef

127.

NDMA (2014) Seismic retrofitting of deficient buildings and structures. India

128.

NIST (2012) program plan for the development of seismic design guidelines for port container, wharf, and cargo systems

129.

NIST (2013) Review of past performance and further development of modeling techniques for collapse assessment of existing reinforced concrete buildings.

130.

Oyguc R (2016) Seismic performance of RC school buildings after 2011 Van earthquakes. Bull Earthq Eng 14:821–847. https://doi.org/10.1007/s10518-015-9857-4CrossRef

131.

Oyguc R, Oyguc E (2017) 2011 Van earthquakes: lessons from damaged masonry structures. J Perform Constructed Facil 31. https://doi.org/10.1061/(asce)cf.1943-5509.0001057

132.

Padalu PKVR, Singh Y, Das S (2020) Cyclic two-way out-of-plane testing of unreinforced masonry walls retrofitted using composite materials. Constr Build Mater 238:117784. https://doi.org/10.1016/J.CONBUILDMAT.2019.117784

133.

Padalu PKVR, Singh Y, Das S (2019) Out-of-plane flexural behaviour of masonry wallettes strengthened using FRP composites and externally bonded grids: Comparative study. Composites Part B 176. https://doi.org/10.1016/J.COMPOSITESB.2019.107302

134.

Pekelnicky R, Poland C (2012) seismic evaluation and retrofit rehabilitation of existing buildings. In: SEAOC 2012 convention proceedings

135.

Perera R, Gómez S, Alarcón E (2004) Experimental and analytical study of masonry infill reinforced concrete frames retrofitted with steel braces. J Struct Eng 130:2032–2039. https://doi.org/10.1061/(asce)0733-9445(2004)130:12(2032)CrossRef

136.

Piekarczyk M, Grec R (2012) Application of adhesive bonding in steel and aluminium structures. Arch Civ Eng 58:309–329. https://doi.org/10.2478/v.10169-012-0018-8CrossRef

137.

Power A (2008) Does demolition or refurbishment of old and inefficient homes help to increase our environmental, social and economic viability? Energy Policy 36:4487–4501. https://doi.org/10.1016/j.enpol.2008.09.022CrossRef

138.

Prakash SS, Alagusundaramoorthy P (2008) Load resistance of masonry wallettes and shear triplets retrofitted with GFRP composites. Cem Concr Compos 30:745–761. https://doi.org/10.1016/J.CEMCONCOMP.2007.11.005CrossRef

139.

Pugsley AG (1951) Concepts of safety in structural Engineering, Pugsley on concepts of safety in structural engineering.

140.

Pushpakumara B, Mendis W, de Silva S (2016) Bamboo as a new retrofitting material for existing masonry walls with improving the walls aesthetic view. Built Environ Spatial Sci

141.

Roca P, Araiza G (2010) Shear response of brick masonry small assemblages strengthened with bonded FRP laminates for in-plane reinforcement. Constr Build Mater 24:1372–1384. https://doi.org/10.1016/J.CONBUILDMAT.2010.01.005CrossRef

142.

Roeder CW, Banerjee S, Jung DR, Smith SK (1996) The role of building foundations in seismic retrofit. Earthq Spectra (EERI) 12:925–942CrossRef

143.

Scozzese F, Terracciano G, Zona A, Corte GD, Dall’Asta A, Landolfo R (2018) Modeling and seismic response analysis of italian code-conforming single-storey steel buildings. J Earthq Eng 22:2104–2133. https://doi.org/10.1080/13632469.2018.1528913

144.

Sen D (2017) Behaviour and strength of RC columns retrofitted with steel angles and strips under eccentric axial loads. Bangladesh University of Engineering and Technology

145.

Shrive NG (2006) The use of fibre reinforced polymers to improve seismic resistance of masonry. Constr Build Mater 20:269–277. https://doi.org/10.1016/J.CONBUILDMAT.2005.08.030CrossRef

146.

da Silva LS, Silva LC, Tankova T, Craveiro HD, Simões R, Costa R, D’Aniello M, Landolfo R (2021) Performance of modular hybrid cold-formed/tubular structural system. Structures 30:1006–1019. https://doi.org/10.1016/j.istruc.2021.01.066CrossRef

147.

Sonuvar M, Ozcebe G, Ersoy U (2004) Rehabilitation of reinforced concrete frames with reinforced concrete infills. ACI Struct J 101. https://doi.org/10.14359/13335

148.

Sumerente G, Lovon H, Tarque N, Chácara C (2020) Assessment of combined in-plane and out-of-plane fragility functions for adobe masonry buildings in the peruvian andes. Front Built Environ 6:52. https://doi.org/10.3389/FBUIL.2020.00052/BIBTEXCrossRef

149.

Suwal R (2018) Failure study of reinforced concrete buildings of kathmandu valley in gorkha earthquake 2015. Int J Modern Res Eng Manag (IJMREM) 2581–4540

150.

Taghdi M, Bruneau M, Saatcioglu M (2000) Seismic retrofitting of low-rise masonry and concrete walls using steel strips. J Struct Eng 126:1017–1025. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:9(1017)CrossRef

151.

Takeuchi T, Wada A (2018) Review of buckling-restrained brace design and application to tall buildings. Int J High-Rise Build 7:187–195

152.

Taljsten B (1997) Strengthening of beams by plate bonding. J Mater Civil Eng 9

153.

Tan KH, Patoary MKH (2004) Strengthening of masonry walls against out-of-plane loads using fiber-reinforced polymer reinforcement. J Compos Constr 8:79–87. https://doi.org/10.1061/(ASCE)1090-0268(2004)8:1(79)CrossRef

154.

Tartaglia R, Milone A, Prota A, Landolfo R (2022) seismic retrofitting of existing industrial steel buildings: a case-study. Materials 15. https://doi.org/10.3390/ma15093276

155.

Tetley R, Madabhushi G (2007) Vulnerability of adobe buildings under earthquake loading. In: Proceedings of the international conference on earthquake geotechnical engineering. Greece

156.

Tetteh AR, Liang Y (2020) Repair of cracks on concrete structures. Int J Sci Res (IJSR) 9:82–92. https://doi.org/10.21275/sr20324212517

157.

Thermou GE, Elnashai AS (2006) Seismic retrofit schemes for RC structures and local-global consequences. Prog Struct Mat Eng 8:1–15CrossRef

158.

Thorburn LJ, Kulak GL, Montgomery CJ (1983) Analysis of steel plate shear walls. Edmonton, Alberta, Canada

159.

Tsavdaridis KD (2014) Strengthening techniques: code-deficient steel buildings. Encyclopedia of earthquake engineering. Springer, Berlin, pp 1–26

160.

Tsavdaridis KD, D’Mello C, Huo BY (2013) Experimental and computational study of the vertical shear behaviour of partially encased perforated steel beams. Eng Struct 56:805–822. https://doi.org/10.1016/j.engstruct.2013.04.025CrossRef

161.

Tsonos AG (2002) Seismic repair of reinforced concrete beam-column subassemblages of modern structures by epoxy injection technique. Struct Eng Mech 14:543–563. https://doi.org/10.12989/SEM.2002.14.5.543

162.

Turer A, Korkmaz SZ, Korkmaz HH (2007) Performance improvement studies of masonry houses using elastic post-tensioning straps. Earthq Eng Struct Dyn 36:683–705. https://doi.org/10.1002/EQE.649CrossRef

163.

Turk AM (2013) Seismic response analysis of masonry minaret and possible strengthening by fiber reinforced cementitious matrix (FRCM) materials. Adv Mater Sci Eng. https://doi.org/10.1155/2013/952497

164.

Turner BA (1978) Man-made disasters. Wykeham Publications, London

165.

Valluzzi MR, Tinazzi D, Modena C (2002) Shear behavior of masonry panels strengthened by FRP laminates. Constr Build Mater 16:409–416. https://doi.org/10.1016/S0950-0618(02)00043-0CrossRef

166.

Warner J (1995) Understanding shotcrete—the fundamentals. Concr Int 17(5)

167.

Wasserman I (2019) Behaviour of concrete structures upon the impact of UV and rain of natural acidity. J Int Sci Publ: Mater Methods Technol (Online) 13:210–229

168.

Willis CR, Yang Q, Seracino R, Griffith MC (2009) Damaged masonry walls in two-way bending retrofitted with vertical FRP strips. Constr Build Mater 23:1591–1604. https://doi.org/10.1016/J.CONBUILDMAT.2007.09.007CrossRef

169.

Yadav P, Khursheed S, Solanki SK, Kumar Paul V (2022) A review of retrofitting techniques of masonry structures.

170.

Yang CS, Leon RT, DesRoches R (2008) Design and behavior of zipper-braced frames. Eng Struct 30:1092–1100. https://doi.org/10.1016/j.engstruct.2007.06.010CrossRef

171.

Ying B (2021) Investigating the behavior of boundary elements in steel shear walls with different connections. Stavební Obzor—Civil Eng J 30. https://doi.org/10.14311/cej.2021.04.0071

172.

Yılmaz S, Tama YS, Kaplan H, Caliskan O, Solak A (2011) Experimental program on design and application of external retrofit walls for low ductility RC frames. In: 4th international conference on advances in experimental structural engineering. Isprira, Italy

173.

Yossef NM (2015) Strengthening steel I-beams by welding steel plates before or while loading. Int J Eng Res Technol (IJERT) 4

174.

Zhao B, Taucer F, Rossetto T (2009) Field investigation on the performance of building structures during the 12 May 2008 Wenchuan earthquake in China. Eng Struct 31:1707–1723. https://doi.org/10.1016/j.engstruct.2009.02.039CrossRef

Titel: Seismic Retrofitting and Strengthening of Structures
verfasst von: Pranoy Debnath
Sekhar Chandra Dutta
Verlag: Springer Nature Singapore
Buch: RC Structures Strengthened with FRP for Earthquake Resistance
Print ISBN: 978-981-9701-01-8

Electronic ISBN: 978-981-9701-02-5

Copyright-Jahr: 2024
DOI: https://doi.org/10.1007/978-981-97-0102-5_6

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"