nach oben

Erschienen in:

01.11.2023 | STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

The Structure and Martensitic Transformation of Deformed Ni−Mn−Ga Alloys

verfasst von: I. I. Musabirov, R. Yu. Gaifullin, I. M. Safarov, R. M. Galeev, D. D. Afonichev, K. K. Kirilyuk, V. V. Koledov, A. V. Mashirov, R. R. Mulyukov

Erschienen in: Physics of Metals and Metallography | Ausgabe 11/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The results of the study of the influence of multi-axial isothermal forging on the microstructure and martensitic transformation in a Ni₅₈Mn₁₈Ga₂₄ alloy have been presented. Forging is performed in two stages: the first stage is forging at 700°C by four passes with true strain e ≈ 1.64; the second stage is forging at 500°C by one pass with e ≈ 0.24. The forging deformation results in the transformation of the original equiaxed-grain structure. No new grains are formed after the first stage of treatment. New recrystallized grains in a very negligible extent begin to be observed only after the second stage of deformation. Probably, at the first stage, the mechanism of fragmentation of the grain structure is not started due to an insufficient density of defects upon the deformation at 700°C. The characteristic temperatures of martensitic transformation are shifted after forging to the low temperature region. The anharmonic change in the sample length is observed in the region of martensitic transformation for the both treated states. In general, this indicates a low level of defect density and internal stresses in the sample.

Vorheriger Artikel Magnitocaloric Effect of Mn2YSn (Y = Sc, Ti, V) Alloys

Nächster Artikel Phase Stability of Ni–(Co)–Mn–Z Heusler Alloys (Z = Ga, In, Sb, Sn)

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A. Kamantsev, A. Mashirov, E. Dilmieva, D. Zakharov, A. Zhikharev, V. Koledov, V. Shavrov, A. Irzhak, A. Shelyakov, and F. Albertiti, “New approaches to manipulation of microbiological objects,” Phys. Procedia 82, 15–20 (2016). https://doi.org/10.1016/j.phpro.2016.05.004CrossRef

Z. Zhou, P. Wu, G. Ma, B. Yang, Z. Li, T. Zhou, D. Wang, and Yo. Du, “Large reversible magnetic-field-induced strain in a trained Ni_49.5Mn₂₈Ga_22.5 polycrystalline alloy,” J. Alloys Compd. 792, 399–404 (2019). https://doi.org/10.1016/j.jallcom.2019.04.038CrossRef

A. A. Mendonça, J. F. Jurado, S. J. Stuard, L. E. L. Silva, G. G. Eslava, L. F. Cohen, L. Ghivelder, and A. M. Gomes, “Giant magnetic-field-induced strain in Ni₂MnGa-based polycrystal,” J. Alloys Compd. 738, 509–514 (2018). https://doi.org/10.1016/j.jallcom.2017.12.197CrossRef

U. Gaitzsch, M. Pötschke, S. Roth, B. Rellinghaus, and L. Schultz, “A 1% magnetostrain in polycrystalline 5M Ni–Mn–Ga,” Acta Mater. 57, 365–370 (2009). https://doi.org/10.1016/j.actamat.2008.09.017CrossRef

I. D. Rodionov, Yu. S. Koshkid’ko, J. Cwik, A. Quetz, S. Pandey, A. Aryal, I. S. Dubenko, S. Stadler, N. Ali, I. S. Titov, M. Blinov, M. V. Prudnikova, V. N. Prudnikov, E. Lähderanta, and A. B. Granovskii, “Magnetocaloric effect in Ni₅₀Mn₃₅In₁₅ Heusler alloy in low and high magnetic fields,” JETP Lett. 101, 385–389 (2015). https://doi.org/10.1134/s0021364015060107CrossRef

A. M. Aliev, A. B. Batdalov, L. N. Khanov, A. V. Mashirov, E. T. Dil’mieva, V. V. Koledov, and V. G. Shavrov, “Degradation of the magnetocaloric effect in Ni_49.3Mn_40.4In_10.3 in a cyclic magnetic field,” Phys. Solid State 62, 837–840 (2020). https://doi.org/10.1134/s1063783420050030CrossRef

J. Yang, Z. Li, B. Yang, H. Yan, D. Cong, X. Zhao, and L. Zuo, “Effects of Co and Si co-doping on magnetostructural transformation and magnetocaloric effect in Ni–Mn–Sn based alloys,” J. Alloys Compd. 892, 162190 (2022). https://doi.org/10.1016/j.jallcom.2021.162190CrossRef

V. V. Sokolovskiy, O. N. Miroshkina, V. D. Buchelnikov, and V. V. Marchenkov, “Magnetocaloric effect in metals and alloys,” Phys. Met. Metallogr. 123, 315–318 (2022). https://doi.org/10.1134/s0031918x2204010xCrossRef

V. V. Sokolovskiy, O. N. Miroshkina, and V. D. Buchelnikov, “Review of modern theoretical approaches for study of magnetocaloric materials,” Phys. Met. Metallogr. 123, 319–374 (2022). https://doi.org/10.1134/s0031918x22040111CrossRef

10.

L. Wei, X. Zhang, W. Gan, C. Ding, C. Liu, L. Geng, and Yi. Yan, “Large rotating magnetocaloric effects in polycrystalline Ni–Mn–Ga alloys,” J. Alloys Compd. 874, 159755 (2021). https://doi.org/10.1016/j.jallcom.2021.159755CrossRef

11.

J. Chen, L. Lei, and G. Fang, “Elastocaloric cooling of shape memory alloys: A review,” Mater. Today Commun. 28, 102706 (2021). https://doi.org/10.1016/j.mtcomm.2021.102706CrossRef

12.

Ya. Feng, J. Gao, M. Zhou, and H. Wang, “Giant elastocaloric effect induced by lower stress in Ni–Mn–In–Fe ferromagnetic shape memory alloys,” J. Magn. Magn. Mater. 563, 169906 (2022). https://doi.org/10.1016/j.jmmm.2022.169906CrossRef

13.

W. Gui, Yu. Qu, Yu. Cao, Yu. Zhao, C. Liu, Q. Zhou, J. Chen, and Ya. Liu, “The effect of Tb substitution for Ni on microstructure, martensitic transformation and cyclic stability of elastocaloric effect in Ni–Mn–Sn magnetic shape memory alloys,” J. Mater. Res. Technol. 19, 4998–5007 (2022). https://doi.org/10.1016/j.jmrt.2022.07.018CrossRef

14.

Yo. Zhu, H. Xuan, J. Su, F. Chen, K. Zhang, P. Han, and J. Qiao, “Large elastocaloric effect in as-cast Ni–Mn–Sn–Fe ferromagnetic shape memory alloys,” Phys. Lett. A 451, 128374 (2022). https://doi.org/10.1016/j.physleta.2022.128374CrossRef

15.

W. Everhart and J. Newkirk, “Mechanical properties of Heusler alloys,” Heliyon 5, e01578 (2019). https://doi.org/10.1016/j.heliyon.2019.e01578CrossRef

16.

V. G. Pushin, E. B. Marchenkova, A. V. Korolev, N. I. Kourov, E. S. Belosludtseva, A. V. Pushin, and A. N. Uksusnikov, “Magnetically controlled thermoelastic martensite transformations and properties of a fine-grained Ni₅₄Mn₂₁Ga₂₅ alloy,” Phys. Solid State 59, 1321–1331 (2017). https://doi.org/10.1134/s1063783417070198CrossRef

17.

E. B. Marchenkova, V. G. Pushin, V. A. Kazantsev, A. V. Korolev, N. I. Kourov, and A. V. Pushin, “Thermoelastic martensite transformations and the properties of ultrafine-grained Ni₅₄Mn₂₀Fe₁Ga₂₅ alloys obtained by melt quenching,” Phys. Met. Metallogr. 119, 936–945 (2018). https://doi.org/10.1134/s0031918x18100095CrossRef

18.

S. Dey, R. K. Roy, A. B. Mallick, A. Mitra, and A. K. Panda, “Influence of rapid solidification on mangnetostructural and magnetocaloric effect in Ni₅₃Mn₂₄Ga₂₃ alloy,” Mater. Today Commun. 17, 140–143 (2018). https://doi.org/10.1016/j.mtcomm.2018.09.001CrossRef

19.

J. Yang, Z. Li, B. Yang, H. Yan, D. Cong, X. Zhao, and L. Zuo, “Strain manipulation of magnetocaloric effect in a Ni_39.5Co_8.5Mn₄₂Sn₁₀ melt-spun ribbon,” Scr. Mater. 224, 115141 (2023). https://doi.org/10.1016/j.scriptamat.2022.115141CrossRef

20.

Yi. Zhang, J. Ouyang, X. Wang, Yu. Tian, and Z. Ren, “Magneto-structural transformations and magnetocaloric effect in the Heusler type Ni₄₈Cu₂Mn₃₆Sn_14–xTi_x melt-spun ribbons,” Mater. Chem. Phys. 290, 126527 (2022). https://doi.org/10.1016/j.matchemphys.2022.126527CrossRef

21.

V. Pushin, A. Korolyov, N. Kuranova, E. Marchenkova, and Yu. Ustyugov, “New metastable baro- and deformation-induced phases in ferromagnetic shape memory Ni₂MnGa-based alloys,” Materials 15, 2277 (2022). https://doi.org/10.3390/ma15062277CrossRef

22.

Yu. V. Kaletina, E. D. Greshnova, and A. Yu. Kaletin, “Evolution of structure and properties of Ni₄₇Mn₄₂In₁₁ alloy after plastic deformation,” Phys. Solid State 61, 2183–2188 (2019). https://doi.org/10.1134/S1063783419110192CrossRef

23.

R. Chulist, A. Böhm, E. Rybacki, T. Lippmann, C. G. Oertel, and W. Skrotzki, “Texture evolution of HPT-processed Ni₅₀Mn₂₉Ga₂₁,” Mater. Sci. Forum 702–703, 169–172 (2011). https://doi.org/10.4028/www.scientific.net/msf.702-703.169

24.

R. Chulist, W. Skrotzki, C. Oertel, A. Böhm, T. Lippmann, and E. Rybacki, “Microstructure and texture in Ni₅₀Mn₂₉Ga₂₁ deformed by high-pressure torsion,” Scr. Mater. 62, 650–653 (2010). https://doi.org/10.1016/j.scriptamat.2010.01.016CrossRef

25.

R. Chulist, W. Skrotzki, C. Oertel, A. Böhm, H. Brokmeier, and T. Lippmann, “Cyclic fibre texture in hot extruded Ni₅₀Mn₂₉Ga₂₁,” Int. J. Mater. Res. 103, 575–579 (2012). https://doi.org/10.3139/146.110735CrossRef

26.

L. Wei, X. Zhang, W. Gan, C. Ding, and L. Geng, “Hot extrusion approach to enhance the cyclic stability of elastocaloric effect in polycrystalline Ni–Mn–Ga alloys,” Scr. Mater. 168, 28–32 (2019). https://doi.org/10.1016/j.scriptamat.2019.04.009CrossRef

27.

L. Wei, X. Zhang, M. Qian, X. Cui, L. Geng, J. Sun, L. V. Panina, and H. Peng, “Introducing equiaxed grains and texture into Ni–Mn–Ga alloys by hot extrusion for superplasticity,” Mater. Des. 112, 339–344 (2016). https://doi.org/10.1016/j.matdes.2016.09.076CrossRef

28.

I. I. Musabirov, I. M. Safarov, R. M. Galeyev, D. D. Afonichev, R. Y. Gaifullin, V. S. Kalashnikov, E. T. Dilmieva, V. V. Koledov, S. V. Taskaev, and R. R. Mulyukov, “Influence of multi-axial isothermal forging on the stability of martensitic transformation in a Heusler Ni–Mn–Ga alloy,” Trans. Indian Inst. Met. 74, 2481–2489 (2021). https://doi.org/10.1007/s12666-021-02349-9CrossRef

29.

R. Yu. Gaifullin, A. B. Gadzhiev, A. M. Aliev, S. V. Taskaev, and I. I. Musabirov, “Magnetocaloric effect in a Ni_2.25Mn_0.75Ga_0.93Si_0.07 alloy,” J. Commun. Technol. Electron. 68, 407–412 (2023). https://doi.org/10.1134/s1064226923040022CrossRef

30.

I. I. Musabirov, R. M. Galeyev, and I. M. Safarov, “Thermal expansion anisotropy formed by extrusion for Ni_2.26Mn_0.80Ga_0.89Si_0.05 alloy,” J. Magn. Magn. Mater. 514, 167160 (2020). https://doi.org/10.1016/j.jmmm.2020.167160CrossRef

31.

I. I. Musabirov, I. M. Safarov, R. M. Galeyev, D. D. Afonichev, R. Y. Gaifullin, V. V. Koledov, S. V. Taskaev, and R. R. Mulyukov, “Effect of treatment by isothermal forging on martensitic transformationin the Ni–Mn–Ga Heusler alloys,” Chelyabinskii Fiz.-Mat. Zh. 5, 601–611 (2020). https://doi.org/10.47475/2500-0101-2020-15419CrossRef

32.

I. I. Musabirov, Kh. Ya. Mulyukov, V. V. Koledov, and V. G. Shavrov, “Thermal expansion of Ni_2.08Mn_0.96Ga_0.96 alloy,” Tech. Phys. 56, 423–426 (2011). https://doi.org/10.1134/s1063784211030145CrossRef

Titel: The Structure and Martensitic Transformation of Deformed Ni−Mn−Ga Alloys
verfasst von: I. I. Musabirov
R. Yu. Gaifullin
I. M. Safarov
R. M. Galeev
D. D. Afonichev
K. K. Kirilyuk
V. V. Koledov
A. V. Mashirov
R. R. Mulyukov
Publikationsdatum: 01.11.2023
Verlag: Pleiades Publishing
Erschienen in: Physics of Metals and Metallography / Ausgabe 11/2023
Print ISSN: 0031-918X
Elektronische ISSN: 1555-6190
DOI: https://doi.org/10.1134/S0031918X23601622

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2023

Baric Transformation of the Character of the Magnetic Order and Magnetocaloric Properties in the Mn1 – xCrxNiGe System

Magnetocaloric Effect in Rare-Earth Magnets

Electronic Structure and Magnetic Properties of FeRhSn1 − xZx Alloys (Z = Ge, Si, Sb): First Principles Studies

Thermal Contact Resistance of the Copper–Copper Pair with Graphene Thermal Interface in Magnetic Fields up to 10 T

Modern Magnetocaloric Materials: Current Problems and Future Research Prospects

Advanced Non-Contact Optical Methods for Measuring the Magnetocaloric Effect