nach oben

European Journal of Wood and Wood Products

Erschienen in:

02.08.2022 | Original Article

Wood fiber - sodium silicate mixtures for additive manufacturing of composite materials

verfasst von: Berlinda O. Orji, Conal Thie, Kenneth Baker, Michael R. Maughan, Armando G. McDonald

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 1/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A composite mixture of wood fiber and sodium silicate (SS) binder has been explored as a viable material for use in additive manufacture of wood based composite materials. Mixtures of 50–60% wood fiber and 50 − 40% SS were explored. The curing behavior of these formulations were examined by differential scanning calorimetry (DSC) and dynamic rheometry. An exothermic curing peak of 83 °C was observed for SS and increased to 153 and 163 °C with the addition of wood fiber. Rheology flow curves showed higher viscosity values for 50/50 blends and lower values for SS. A custom extrusion system was fabricated and 50/50 wet blends were extruded, cured at different temperatures, and characterized for flame retardancy, mechanical, thermal, and water absorption properties. Surface chemistry changes before and after curing were determined by Fourier Transform Infrared (FTIR) spectroscopy. Mechanical properties, determined by three-point bend testing, improved with the addition of the wood fiber but varied with different curing temperatures and thermal stability of the composites increased with curing temperature. This extruded wood-SS composite shows promise for use in additive manufacturing.

Vorheriger Artikel Vacuum infusion as a novel method to determine wood permeability

Nächster Artikel Correction: Wood fiber - sodium silicate mixtures for additive manufacturing of composite materials

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Additive Manufacturing Materials Market – Industry Reports. https://www.industryresearch.co/additive-manufacturing-materials-market-13999766

Antov P, Savov V, Neykov N (2020) Sustainable bio-based adhesives for eco-friendly wood composites. A review. WOOD Res 65:15. https://doi.org/10.37763/wr.1336-4561/65.1.051062CrossRef

Artner MA, de Cademartori PHG, Avelino F, Lomonaco D, Magalhães WLE (2021) A novel design for nanocellulose reinforced urea–formaldehyde resin: A breakthrough in amino resin synthesis and biocomposite manufacturing. Cellulose 28(6):3435–3450. https://doi.org/10.1007/s10570-021-03739-4CrossRef

Bagheri A, Jin J (2019) Photopolymerization in 3D Printing. ACS Appl Polym Mater 1(4):593–611. https://doi.org/10.1021/acsapm.8b00165CrossRef

Berlangieri C, Poggi G, Murgia S, Monduzzi M, Baglioni P, Dei L, Carretti E (2018) Structural, rheological and dynamics insights of hydroxypropyl guar gel-like systems. Colloids and Surfaces B: Biointerfaces, 168. https://doi.org/10.1016/j.colsurfb.2018.02.025

Berzins A, Morozovs A, Gross U, Iejavs J (2017) Mechanical properties of wood-geopolymer composite. 1167–1173. https://doi.org/10.22616/ERDev2017.16.N251

Bifulco A, Silvestri B, Passaro J, Boccarusso L, Roviello V, Branda F, Durante M (2020) A New Strategy to Produce Hemp Fibers through a Waterglass-Based Ecofriendly Process. Materials 13(8):1844. https://doi.org/10.3390/ma13081844CrossRefPubMedPubMedCentral

Bilgin Guller (2012) Effects of heat treatment on density, dimensional stability and color of Pinus nigra wood. Afr J Biotechnol 11(9):2204–2209. https://doi.org/10.5897/AJB11.3052CrossRef

Bobrowski A, Hutera BStypuła, Kmita B, Drożyński A, Starowicz D, M (2012) FTIR spectroscopy of water glass—The binder moulding modified by ZnO nanoparticles. Metalurgija -Sisak Then Zagreb 4:477–480

Brown JR (2000) Sodium silicate bonded sand. In Foseco Ferrous Foundryman’s Handbook (pp. 204–215). Elsevier. https://doi.org/10.1016/B978-075064284-2/50015-6

Buschmann B, Henke K, Talke D, Saile B, Asshoff C, Bunzel F (2021) Additive Manufacturing of Wood Composite Panels for Individual Layer Fabrication (ILF). Polymers 13(19):3423. https://doi.org/10.3390/polym13193423CrossRefPubMedPubMedCentral

Candan Z, Gardner DJ, Shaler SM (2016) Dynamic mechanical thermal analysis (DMTA) of cellulose nanofibril/nanoclay/pMDI nanocomposites. Compos Part B: Eng 90:126–132. https://doi.org/10.1016/j.compositesb.2015.12.016CrossRef

Chai W, Zhang L, Li W, Zhang M, Huang J, Zhang W (2021) Preparation of Plastics- and Foaming Agent-Free and Porous Bamboo Charcoal based Composites Using Sodium Silicate as Adhesives. Materials 14(10):2468. https://doi.org/10.3390/ma14102468CrossRefPubMedPubMedCentral

Chen H, Lang Q, Bi Z, Miao X, Li Y, Pu J (2014) Impregnation of poplar wood (Populus euramericana) with methylolurea and sodium silicate sol and induction of in-situ gel polymerization by heating. Holzforschung 68(1):45–52. https://doi.org/10.1515/hf-2013-0028CrossRef

Chen Q, Zhang R, Qin D, Feng Z, Wang Y (2018) Modification of the Physical-mechanical Properties of Bamboo-plastic Composites with Bamboo Charcoal after Hydrothermal Aging. BioResources 13(1):1661–1677. https://doi.org/10.15376/biores.13.1.1661-1677CrossRef

Cheng S, Huang A, Wang S, Zhang Q (2016) Effect of Different Heat Treatment Temperatures on the Chemical Composition and Structure of Chinese Fir Wood. BioResources 11:4006–4016. https://doi.org/10.15376/biores.11.2.4006-4016CrossRef

Cheng X (2013) Superhydrophobic sodium silicate based silica aerogel prepared by ambient pressure drying. Materials Chemistry and Physics, 141(1):570–575. https://doi.org/10.1016/j.matchemphys.2013.05.064

Cherkasova NG (2020) How Adding Wood Dust Affects the Properties of Composite Construction Materials. IOP Conference Series: Earth and Environmental Science, 459, 032054. https://doi.org/10.1088/1755-1315/459/3/032054

Dimas D, Giannopoulou I, Panias D (2009) Polymerization in sodium silicate solutions: A fundamental process in geopolymerization technology. J Mater Sci 44(14):3719–3730. https://doi.org/10.1007/s10853-009-3497-5CrossRef

Domínguez JC (2018) Chapter 4—Rheology and curing process of thermosets. In Q. Guo (Ed.), Thermosets (Second Edition) (pp. 115–146). Elsevier. https://doi.org/10.1016/B978-0-08-101021-1.00004-6

Duretek I, Schuschnigg S, Gooneie A, Langecker GR, Holzer C (2015) Rheological properties of wood polymer composites and their role in extrusion. Journal of Physics: Conference Series, 602, 012014. https://doi.org/10.1088/1742-6596/602/1/012014

Falk B, McKeever D (2012) Generation and Recovery of Solid Wood Waste in the U.S. BioCycle August 2012, Vol. 53, No. 8, p. 30

Feng Y-H, Zhang D-W, Qu J-P, He H-Z, Xu B-P (2011) Rheological properties of sisal fiber/poly(butylene succinate) composites. Polym Test 30(1):124–130. https://doi.org/10.1016/j.polymertesting.2010.11.004CrossRef

Firdous R, Hirsch T, Klimm D, Lothenbach B, Stephan D (2021) Reaction of calcium carbonate minerals in sodium silicate solution and its role in alkali-activated systems. Miner Eng 165:106849. https://doi.org/10.1016/j.mineng.2021.106849CrossRef

Gul W, Khan A, Shakoor A (2017) Impact of Hot Pressing Temperature on Medium Density Fiberboard (MDF) Performance. Advances in Materials Science and Engineering, 2017, e4056360. https://doi.org/10.1155/2017/4056360

Gupta VB, Drzal LT, Lee CY-C, Rich MJ (1985) The temperature-dependence of some mechanical properties of a cured epoxy resin system. Polym Eng Sci 25(13):812–823. https://doi.org/10.1002/pen.760251305CrossRef

Izak P, Ogłaza L, Mozgawa W, Mastalska-Popławska J, Stempkowska A (2018) Influence of the type of aqueous sodium silicate on the stabilization and rheology of kaolin clay suspensions. Spectrochim Acta Part A Mol Biomol Spectrosc 196:155–159. https://doi.org/10.1016/j.saa.2018.02.022CrossRef

Joseph S, Appukuttan SP, Kenny JM, Puglia D, Thomas S, Joseph K (2010) Dynamic mechanical properties of oil palm microfibril-reinforced natural rubber composites. J Appl Polym Sci 117(3):1298–1308. https://doi.org/10.1002/app.30960CrossRef

Kaseem M, Hamad K, Deri F, Ko YG (2017) Effect of Wood Fibers on the Rheological and Mechanical Properties of Polystyrene/Wood Composites. J Wood Chem Technol 37(4):251–260. https://doi.org/10.1080/02773813.2016.1272127CrossRef

Katoueizadeh E, Rasouli M, Zebarjad SM (2020) A comprehensive study on the gelation process of silica gels from sodium silicate. J Mater Res Technol 9(5):10157–10165. https://doi.org/10.1016/j.jmrt.2020.07.020CrossRef

Kelley SS, Rials TG, Glasser WG (1987) Relaxation behaviour of the amorphous components of wood. J Mater Sci 22(2):617–624. https://doi.org/10.1007/BF01160778CrossRef

Kodur VKR, Bhatt PP, Soroushian P, Arablouei A (2016) Temperature and stress development in ultra-high performance concrete during curing. Constr Build Mater 122:63–71. https://doi.org/10.1016/j.conbuildmat.2016.06.052CrossRef

Koohestani B, Mokhtari P, Yilmaz E, Mahdipour F, Darban AK (2021) Geopolymerization mechanism of binder-free mine tailings by sodium silicate. Constr Build Mater 268:121217. https://doi.org/10.1016/j.conbuildmat.2020.121217CrossRef

Korniejenko K, Frączek E, Pytlak E, Adamski M (2016) Mechanical Properties of Geopolymer Composites Reinforced with Natural Fibers. Procedia Eng 151:388–393. https://doi.org/10.1016/j.proeng.2016.07.395CrossRef

Krapež Tomec D, Kariž M (2022) Use of Wood in Additive Manufacturing: Review and Future Prospects. Polymers 14(6):1174. https://doi.org/10.3390/polym14061174CrossRefPubMedPubMedCentral

Laufer N, Hansmann H, Koch M (2017) Rheological Characterisation of the Flow Behaviour of Wood Plastic Composites in Consideration of Different Volume Fractions of Wood. 790:012017. https://doi.org/10.1088/1742-6596/790/1/012017

Le CM, Le T-H (2021) The Study’s Chemical Interaction of the Sodium Silicate Solution with Extender Pigments to Investigate High Heat Resistance Silicate Coating. Journal of Analytical Methods in Chemistry, 2021, e5510193. https://doi.org/10.1155/2021/5510193

Lewandowski K, Piszczek K, Zajchowski S, Mirowski J (2016) Rheological properties of wood polymer composites at high shear rates. Polym Test 51:58–62. https://doi.org/10.1016/j.polymertesting.2016.02.004CrossRef

Li P, Zhang Y, Zuo Y, Lu J, Yuan G, Wu Y (2020) Preparation and characterization of sodium silicate impregnated Chinese fir wood with high strength, water resistance, flame retardant and smoke suppression. J Mater Res Technol 9(1):1043–1053. https://doi.org/10.1016/j.jmrt.2019.10.035CrossRef

Li TQ, Wolcott MP (2004) Rheology of HDPE–wood composites. I. Steady state shear and extensional flow. Compos Part A: Appl Sci Manufac 35(3):303–311. https://doi.org/10.1016/j.compositesa.2003.09.009CrossRef

Li W, Peng J, Guo S, Zhang L, Chen G, Xia H (2013) Carbothermic reduction kinetics of ilmenite concentrates catalyzed by sodium silicate and microwave-absorbing characteristics of reductive products. Chem Ind Chem Eng Q 19(3):423–433. https://doi.org/10.2298/CICEQ120421077LCrossRef

Lüthi D, Le Floch M, Bereiter B, Blunier T, Barnola J-M, Siegenthaler U, Raynaud D, Jouzel J, Fischer H, Kawamura K, Stocker TF (2008) High-resolution carbon dioxide concentration record 650,000–800,000 years before present. Nature 453(7193):379–382. https://doi.org/10.1038/nature06949CrossRefPubMed

Mamun C, Arifuzzaman M (2020) Compressive Properties of Sawdust Composites Consisting of Sodium Silicate Solution and Corn Starch as Binder. 4:129–136. https://doi.org/10.5281/zenodo.3605465

Manning KB, Wyatt N, Hughes L, Cook A, Giron NH, Martinez E, Campbell CG, Celina MC (2019) Self Assembly–Assisted Additive Manufacturing: Direct Ink Write 3D Printing of Epoxy–Amine Thermosets. Macromol Mater Eng 304(3):1800511. https://doi.org/10.1002/mame.201800511CrossRef

Mazhirin PYu (2002) Influence of Various Factors on the Curing of Sodium-Silicate-Based Composites Cured by Carbon Dioxide. Int Polym Sci Technol 29(3):78–82. https://doi.org/10.1177/0307174X0202900317CrossRef

Mazzanti V, Malagutti L, Mollica F (2019) FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties. Polymers 11(7):1094. https://doi.org/10.3390/polym11071094CrossRefPubMedPubMedCentral

Mazzanti V, Mollica F (2020) A Review of Wood Polymer Composites Rheology and Its Implications for Processing. Polymers 12(10):2304. https://doi.org/10.3390/polym12102304CrossRefPubMedPubMedCentral

Ming Y, Duan Y, Wang B, Xiao H, Zhang X (2019) A Novel Route to Fabricate High-Performance 3D Printed Continuous Fiber-Reinforced Thermosetting Polymer Composites. Materials 12(9):1369. https://doi.org/10.3390/ma12091369CrossRefPubMedPubMedCentral

Ming-Li L, Chun-Feng L, Yan-Long L (2019) Physical and mechanical properties of modified poplar wood by heat treatment and impregnation of sodium silicate solution. WOOD Res 64:1:145–153

Nabinejad O, Debnath S, Rahman M, Davies I (2017) Effect of filler load on the curing behavior and mechanical and thermal performance of wood flour filled thermoset composites. J Clean Prod 164:1145–1156. https://doi.org/10.1016/j.jclepro.2017.07.036CrossRef

Ng CW, Yip MW, Lai YC (2018) The Study on the Effects of Sodium Silicate on Particleboard Made from Sugarcane Bagasse. Mater Sci Forum 911:66–70. https://doi.org/10.4028/www.scientific.net/MSF.911.66CrossRef

Owusu YA (1982) Physical-chemistry study of sodium silicate as a foundry sand binder. Adv Colloid Interface Sci 18(1–2):57–91. https://doi.org/10.1016/0001-8686(82)85031-8CrossRef

Papadopoulos AN (2020) Advances in Wood Composites. Polymers 12(1):48. https://doi.org/10.3390/polym12010048CrossRef

Peng Y, Han Y, Gardner DJ (2010) Sodium silicate coated wood. Proceedings of the International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe–Timber Committee (Pp. 11–14). Geneva Switzerland, 11–14

Pham LT, Hatzignatiou DG (2016) Rheological evaluation of a sodium silicate gel system for water management in mature, naturally-fractured oilfields. J Petrol Sci Eng 138:218–233. https://doi.org/10.1016/j.petrol.2015.11.039CrossRef

Phiri MJ, Phiri MM, Mpitso K, Hlangothi SP (2020) Curing, thermal and mechanical properties of waste tyre derived reclaimed rubber–wood flour composites. Mater Today Commun 25:101204. https://doi.org/10.1016/j.mtcomm.2020.101204CrossRef

Pillai K, Mcdonald A, Wagner F (2011) Developing a model system in vitro to understand tracheary element development in Douglas-fir (Pseudostuga mensziesii). Maderas: Ciencia y Tecnología 13:3–18. https://doi.org/10.4067/S0718-221X2011000100001CrossRef

Pongsawatmanit R, Temsiripong T, Ikeda S, Nishinari K (2006) Influence of tamarind seed xyloglucan on rheological properties and thermal stability of tapioca starch. J Food Eng 77(1):41–50. https://doi.org/10.1016/j.jfoodeng.2005.06.017CrossRef

Pratheep Kumar S, Takamori S, Araki H, Kuroda S (2015) Flame retardancy of clay–sodium silicate composite coatings on wood for construction purposes. RSC Adv 5(43):34109–34116. https://doi.org/10.1039/C5RA04682CCrossRef

Rahul AV, Santhanam M, Meena H, Ghani Z (2019) 3D printable concrete: Mixture design and test methods. Cem Concr Compos 97:13–23. https://doi.org/10.1016/j.cemconcomp.2018.12.014CrossRef

Rao AP, Rao AV, Pajonk GM (2007) Hydrophobic and physical properties of the ambient pressure dried silica aerogels with sodium silicate precursor using various surface modification agents. Appl Surf Sci 253(14):6032–6040. https://doi.org/10.1016/j.apsusc.2006.12.117CrossRef

Rosenthal M, Henneberger C, Gutkes A, Bues C-T (2018) Liquid Deposition Modeling: A promising approach for 3D printing of wood. Eur J Wood Prod 76(2):797–799. https://doi.org/10.1007/s00107-017-1274-8CrossRef

Sandomierski M, Buchwald T, Strzemiecka B, Voelkel A (2020) Carbon black modified with 4-hydroxymethylbenzenediazonium salt as filler for phenol-formaldehyde resins and abrasive tools. J Appl Polym Sci 137(3):48160. https://doi.org/10.1002/app.48160CrossRef

Sarmin SN (2016) The Influence of Different Wood Aggregates on the Properties of Geopolymer Composites. Key Engineering Materials, 723, 74–79. https://www.scientific.net/KEM.723.74

Sarmin SN, Welling J, Krause A, Shalbafan A (2014) Investigating the Possibility of Geopolymer to Produce Inorganic-Bonded Wood Composites for Multifunctional Construction Material – A Review. BioResources 9(4):7941–7950. https://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_09_4_Sarmin_Review_Investigating_Possibility_GeopolymerCrossRef

Sayılkan H, Erdemoğlu S, Şener Ş, Sayılkan F, Akarsu M, Erdemoğlu M (2004) Surface modification of pyrophyllite with amino silane coupling agent for the removal of 4-nitrophenol from aqueous solutions. J Colloid Interface Sci 275(2):530–538. https://doi.org/10.1016/j.jcis.2004.02.009CrossRefPubMed

Subasri R, Näfe H (2008) Phase evolution on heat treatment of sodium silicate water glass. J Non-cryst Solids 354(10):896–900. https://doi.org/10.1016/j.jnoncrysol.2007.08.037CrossRef

Tang Y, Su H, Huang S, Qu C, Yang J (2017) Effect of Curing Temperature on the Durability of Concrete under Highly Geothermal Environment. Advances in Materials Science and Engineering, 2017, e7587853. https://doi.org/10.1155/2017/7587853

Tran TT, Kang H, Kwon H-M (2019) Effect of Heat Curing Method on the Mechanical Strength of Alkali-Activated Slag Mortar after High-Temperature Exposure. Materials 12(11):1789. https://doi.org/10.3390/ma12111789CrossRefPubMedPubMedCentral

Ukaji E, Furusawa T, Sato M, Suzuki N (2007) The effect of surface modification with silane coupling agent on suppressing the photo-catalytic activity of fine TiO2 particles as inorganic UV filter. Appl Surf Sci 254(2):563–569. https://doi.org/10.1016/j.apsusc.2007.06.061CrossRef

Valadez-Gonzalez A, Cervantes-Uc JM, Olayo R, Herrera-Franco PJ (1999) Chemical modification of henequén fibers with an organosilane coupling agent. Compos Part B: Eng 30(3):321–331. https://doi.org/10.1016/S1359-8368(98)00055-9CrossRef

Vasconcelos GC, Santos TFA, Angrizani CC, Sales LA, Costa ML, Botelho EC (2021) Creep and Aging Evaluation of Phenol–Formaldehyde Carbon Fiber Composites in Overhead Transmission Lines. Appl Compos Mater 28:1697–1714. https://doi.org/10.1007/s10443-021-09935-6CrossRef

Venet C, Vergnes B (2000) Stress distribution around capillary die exit: An interpretation of the onset of sharkskin defect. J Nonnewton Fluid Mech 93(1):117–132. https://doi.org/10.1016/S0377-0257(00)00105-1CrossRef

Vlachopoulos J, Strutt D (2003) The Role of Rheology in Polymer Extrusion. Extrusion Minitec and Conference: From Basics to Recent Developments, 20–21

Wang S-N, Zhang F-D, Huang A-M, Zhou Q (2016) Distinction of four Dalbergia species by FTIR, 2nd derivative IR, and 2D-IR spectroscopy of their ethanol-benzene extractives. Holzforschung, 70(6), 503–510. https://doi.org/10.1515/hf-2015-0125

Whyman S, Arif KM, Potgieter J (2018) Design and development of an extrusion system for 3D printing biopolymer pellets. Int J Adv Manuf Technol 96(9–12):3417–3428. https://doi.org/10.1007/s00170-018-1843-yCrossRef

Woern AL, Byard DJ, Oakley RB, Fiedler MJ, Snabes SL, Pearce JM (2018) Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties. Materials 11(8):1413. https://doi.org/10.3390/ma11081413CrossRefPubMedPubMedCentral

Yang X, Zhu W, Yang Q (2008) The Viscosity Properties of Sodium Silicate Solutions. J Solution Chem 37(1):73–83. https://doi.org/10.1007/s10953-007-9214-6CrossRef

Yoo D, Yoo B (2005) Rheology of Rice Starch-Sucrose Composites. Starch - Stärke 57(6):254–261. https://doi.org/10.1002/star.200400356CrossRef

Zaharescu M, Predoana L, Pandele-Cusu J (2018) Thermal Analysis on Gels, Glasses, and Powders. In L. Klein, M. Aparicio, & A. Jitianu (Eds.), Handbook of Sol-Gel Science and Technology: Processing, Characterization and Applications (pp. 1833–1867). Springer International Publishing. https://doi.org/10.1007/978-3-319-32101-1_99

Zhou X, Yang J, Su D, Qu G (2009) The high-temperature resistant mechanism of α-starch composite binder for foundry. J Mater Process Technol 209(14):5394–5398. https://doi.org/10.1016/j.jmatprotec.2009.04.010CrossRef

Zhu W, Aitken BG, Sen S (2017) Communication: Non-Newtonian rheology of inorganic glass-forming liquids: Universal patterns and outstanding questions. J Chem Phys 146(8):081103. https://doi.org/10.1063/1.4977085CrossRefPubMed

Zuhua Z, Xiao Y, Huajun Z, Yue C (2009) Role of water in the synthesis of calcined kaolin-based geopolymer. Appl Clay Sci 43(2):218–223. https://doi.org/10.1016/j.clay.2008.09.003CrossRef

Zuhua, Z., Xiao, Y., Huajun, Z., Yue, C. (2009). Role of water in the synthesis of calcined kaolin-based geopolymer. Applied Clay Science, 43(2), 218–223. https://doi.org/10.1016/j.clay.2008.09.003

Titel: Wood fiber - sodium silicate mixtures for additive manufacturing of composite materials
verfasst von: Berlinda O. Orji
Conal Thie
Kenneth Baker
Michael R. Maughan
Armando G. McDonald
Publikationsdatum: 02.08.2022
Verlag: Springer Berlin Heidelberg
Erschienen in: European Journal of Wood and Wood Products / Ausgabe 1/2023
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-022-01861-z

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2023

Possibility of making flexible three-ply plywood using poplar (Populus deltoides) and Paulownia (Paulownia fortunei) veneers

Wettability and surface interactions of natural and thermally modified beech wood with water and water-based coatings: the effect of surface pre-treatment type

Surface characterization of wood treated with acidic deep eutectic solvents

Modelling the process of splitting wood and chipless cutting Pinus sylvestris L. wood in terms of designing the geometry of the tools and the driving force of the machine

Bark based porous materials obtained with a simple mechanical foaming procedure

Digitalization of small and medium sized sawmills in Austria: a survey about business processes