Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
MTZ-Fachkongress

Antriebe und Energiesysteme von morgen


Austausch von Automobil- und Energiewirtschaft

Am 14./15. Mai geht es in Chemnitz um die Mobilitätswende durch Elektro- und Wasserstofffahrzeuge.
Erweiterte Suche
Anmelden
nach oben
Erschienen in:
Introduction Kapitel lesen Erstes Kapitel lesen

2024 | OriginalPaper | Buchkapitel

10. Refining Operating Variables

verfasst von : Vail Manfredi

Erschienen in: Eucalyptus Kraft Pulp Refining

Verlag: Springer Nature Switzerland

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The effects of operational refining variables on the structural modifications of eucalyptus pulp fibers are presented one-by-one based on studies carried out in a refining pilot plant. In this way, it is possible to identify the most important operational variables, in terms of their direct effects on the desired quality of the refined pulp. The beating process in laboratory is also described considering the most usual laboratory beaters.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Vorheriges Kapitel The Refining Models or “Theories”
Nächstes Kapitel Refining Process Control
Literatur
15.
Danforth, D. W. – Analyzing stock preparation. Chemical 26 – Magazine of Paper Processing, 4 (11): 30 (1968)
22.
Bugajer, S.; Silva, O. F. and Pires, F. – Influência do pH na refinação de pastas celulósicas. In: 17° Congresso Anual da ABCP. São Paulo. 1984 pgs. 31–39.
23.
Cotterill, P. and Macrae, S. – Improving eucalyptus pulp and paper quality using genetic selection and good organization. Tappi Journal, 80 (6):82-89 (1997).
26.
38.
42.
Annergren, G. – Fundamentals of pulp fiber quality and paper properties. In: Pulping Conference. TAPPI, Orlando. 1999 pgs: 29–39
43.
44.
Ampulski, R. S. – Influence of fiber surface charge on tensile strength. In: Papermakers Conference. TAPPI, Denver. 1985 pg. 9.
48.
Lyytikainen, K.; Saukkonen, E.; Kajanto, I. and Kayhko, J. – The effect of hemicellulose extraction on fibre charge properties and retention behavior of kraft pulp fibres, Bioresources, 6 (1): 219–231 (2011).
49.
Magaton, A. S.; Colodette, J. L.; Gouvea, A. F. G.; Gomide, J. L.; Muguet, M. C. S. and Pedrazzin, C. – Eucalyptus wood quality and its impact on kraft pulp production and use. Tappi Journal, 8 (8): 32–39 (2009).
52.
Foelkel, C. E. B. and Dalmolin, I. – Improving eucalyptus pulp refining through the control of pulp consistency and stock pH: comparisons at given bulk and given tensile strength. In: Papermakers Conference, TAPPI, Atlanta: 01-04/03/1999 Volume 2 pgs: 751–754
56.
Paavilainen, L. – Quality – competitiveness of Asian short-fibre raw materials in different paper grades. Papperi Ja Puu, 82 (3): 156 (1998).
58.
Kibblewhite, R. P.; Bawden, A. D. and Hughes, M. C. – Hardwood market kraft fibre and pulp qualities. Appita, 44 (5): 325–332 (1991).
62.
Joutsimo, O. P. and Asikainen, S. – Effect of fiber wall pore structure on pulp sheet density of softwood kraft pulp fibers. BioResources, 8 (2):2719–2737 (2013).
63.
67.
68.
Sigl, R. – Low intensity refining of hardwood and deinked pulps with a new generation of filling. Twogether – Paper Technology Journal (8): 7–11 (1999).
73.
Lindqvist, H. – Improvement of wet and dry web properties in papermaking by controlling water and fiber quality. Academic Dissertation, Åbo Akademi University. Åbo., 2013 85 pgs
78.
Tiikkaja, E. – Fibre properties and paper machine runnability. In: Engineering/Process and Product Quality Conference & Trade Fair. TAPPI, Anaheim, 1999 Volume 3 pgs. 1241–1242.
80.
Tiikkaja, E.; Kauppinen, M. and Glorigiano, P. – Fibre dimensions, their effect on paper properties and required measuring accuracy. In: XXXI Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1998 pgs. 397–402.
82.
Demler, C. L. and Pitz, M. – Comparison of conventionally, ECF and TCF bleached hardwood pulp refining response. In: III International Refining Conference and Exhibition. PIRA/IPST, Atlanta, 1995 Paper 9 8 pgs.
83.
Seth, R. S. – The importance of fibre coarseness for pulp properties. In: 77th Annual Technical Meeting. CPPA, Montreal: 1991 pg. 251.
84.
Malan, F. S.; Male, J. R. and Venter, J. S. M. – Relationship between the properties of eucalyptus wood and some chemical, pulp and paper properties. Paper Southern Africa, 14 (1): 6–16 (1994).
85.
Barrichelo, L. E. G. – Estudo das características físicas, anatômicas e químicas da madeira de Pinus caribeae Mor. Var. hondurensis Barr. Golf para a produção de celulose kraft. Tese de Livre Docência – ESALQ/USP (1979).
87.
Silva Jr., F. G. da; Valle, C. F. do e Muner, J. C. G. – Programa de qualidade da madeira da Votorantim Celulose e Papel – VCP. O Papel, 57 (1): 35–43 (1996).
96.
Piirainen, R. and Paavilainen, L. – Fiber length measurement in the pulp and paper industry. In: International Process and Materials Quality Evaluations Conference. TAPPI, Atlanta, 1986 pgs. 67–73.
105.
Ferreira, P. J. and Figueiredo, M. M. – Efeito do cozimento e da refinação nas dimensões transversais das fibras de E. globulus. O Papel, 62 (01: 73–80 (2000).
108.
Green, S. I. – Pulp fibre drag coefficient. Appita Journal, 59 (2): 120–126 (2006).
109.
Pere, J.; Sika-Aho, M. and Vikar, L; – Biomechanical pulping with enzymes: Response of coarse mechanical pulp to enzymatic modification and secondary refining. Tappi Journal, 83 (5): 8 pgs (2000).
110.
Ramires, H.; Oliveira, R. C.; Rubini, B.; Demuner, B. J.; Pavan, P. – Aumento da proporção de fibra de eucalipto na formulação de papeis tissue e avaliação de suas propriedades. In: 46th International Pulp and Paper Congress, ABTCP, São Paulo, 2013 9 pgs.
113.
Ratnieks, E. and Foelkel, C. E. B. – Uma discussão teórioco-prática sobre polpas de eucalipto para a fabricação de papel “tissue”. In: XXIX Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1996 pgs. 717–734.
115.
117.
Gonçalves, D. – The eucalyptus fiber for tissue papers. In: 7th Brazilian Symposium on the Chemistry of Lignin and Other Wood Components. UFMG, Belo Horizonte, 2001 p. 317–323.
124.
Botková, M.; Šutý, Š.; Jablonský, M.; Kučerková, L. and Vrška, M. – Monitoring of kraft pulps swelling in water. Cellulose Chemistry and Technology, 47 (1–2): 95–102 (2013).
125.
Guo, X.; Dong, J.; Liu, H.; Duan, C.; Yang, R. and Qi, K. – Effect of combined refining plates with different bar angles on paper properties during mixed pulp refining. Journal of Korean Wood Science and Technology, 48 (5): 581–590 (2020).
126.
Page, D. H. – A theory for tensile strength of paper. Tappi, 52 (4): 674–681 (1969).
132.
Pulkkinen, I.; Alopaeus, V.; Fiskari, J. and Joutsimo, O. – O uso de dados sobre espessura da parede da fibra para predição das propriedades de folhas de laboratório de polpa de eucalipto. O Papel, 69 (19): 71–85 (2008).
153.
Paavilainen, L. – Importance of cross-dimensional fibre properties and coarseness for the characteristics of softwood sulphate pulp. Paperi ja Puu, 75 (5): 35–43 (1993)
154.
Korteoja, M. J.; Salminen, L. I.; Niskanen, K. J. and Alava, M. – Statistical variation of paper strength. Journal of Pulp and Paper Science, 24 (1): 1–6 (1998).
156.
Yan, H.; Norman, B.; Lindström, T. and Ankefors, M. – Fibre length effect on fibre suspension flocculation and sheet formation. Nordic Pulp and Paper Research Journal, 21 (1): 30–35 (2006).
159.
Lindholm, C.-A. – Determining optimum combinations of mechanical pulp fractions. Paperi ja Puu, 65 (4): 243–245, 247–250 (1983).
160.
Vuorinen, T.; Buchert, J.; Teleman, A.; Tenkanen, M. and Fagerström, P. – Selective hydrolysis of HexA groups and its application in ECF and TCF bleaching of kraft pulps. In: International Pulp Bleaching Conference. TAPPI, Atlanta, 1996, pgs. 43–51.
161.
165.
Gurnagul, N., Page, D. H. and Seth, R. S. – Dry sheet properties of Canadian hardwood kraft pulps. Journal of Pulp and Paper Science, 16 (1): 36–41 (1990).
166.
Kerekes, R. J. and Schell, C. J. – Effects of fiber length and coarseness on pulp flocculation. Tappi Journal, 78 (2): 133–139 (1995).
178.
179.
Pikulik, I. I.; McDonald, J. D.; Mentele, C. J. and Lange, D. V. – The refining, forming, and pressing on fine paper quality. Tappi Journal, 81 (6): 122–130 (1998).
204.
Kärenlampi, P.; Rantanen, R.; Hämäläinen, T. and Suur-Hamari, H. – Opacitt, smoothness and toughness of mechanical printing papers: the effect of softwood kraft pulp properties. In: Papermakers Conference. TAPPI, Philadelphia, 1996 pgs. 153–160.
208.
Retulainen, E. – Fibre properties as control variables in papermaking? Part 1: fibre properties of key importance in the network. Paperi ja Puu, 78 (4): 187–194 (1996).
209.
Kibblewhite, R. P. – Reinforcement and optical properties of separate and co-refined softwood and eucalypt market kraft pulps. Appita Journal, 47 (2): 149–153, 158 (1994).
214.
Santos, A.; Anjos, O. M. and Simões, R. M. S. – Influence of kraft cooking conditions on the pulp quality of Eucalyptus globulus. Appita Journal, 61 (2): 148–155 (2008).
216.
Gurnagul, N. and Seth, R. S. – Wet-web strength of hardwood kraft pulps. In: 83rd Annual Meeting Technical Section. CPPA, Montreal, 1997 Book B pgs. B137–145.
217.
Demuner, B. J.; Manfredi, V. and Claudio-da-Silva Jr., E. – O refino da celulose de eucalipto – uma análise fundamental. O Papel, 52 (8): 44 – 54 (1990).
218.
McKenzie, A. W. – Interpretation of pulp evaluation results. Appita Journal, 38 (4): 284–290 (1985).
219.
Stevens, W. V. – Refining. In: Pulp and Paper Manufacture – Volume 6. Ed. Hagemeyer, R.W., Manson, D.W. and Kocurek, M.J. The Joint Textbook Committee of the Paper Industry, Atlanta/Montreal, 1992: 187–219 (1992).
221.
Koskenhely, K. – Refining of chemical pulp fibres. In: Papermaking Science and Technology. Volume 8 – Paper making part 1 – stock preparation and wet end, Chapter 4. Ed. Paulapuro, H. Finnish Paper Engineers’ Association/Paperi ja Puu Oy, Helsinki: 2007.
222.
Sharkawya, K. E.; Haavistob, S.; Koskenhely, K. and Paulapuroa, H. – Effect of fiber flocculation and filling design on refiner loadability and refining characteristics. BioResources, 3 (2): 403–424 (2008).
244.
Ryu, J-H.; Kim, C-H.; Lee, J-H.; Lee, J-S.; Lee, C-H. and Park, J-H. – Study of refining effect of mixed pulps using refiner plates with different bar patterns. Applied Sciences, 12: 11445 (2022).
249.
Seth, R. S. – Optimizing reinforcement pulps by fracture toughness. Tappi Journal, 79 (1): 170–178 (1996).
252.
Niskanen, K.; Kärenlampi, P. and Alava, M. – Stochastic analysis of paper toyghness. Journal of Pulp and Paper Science, 22 (10): 392–397 (1996).
254.
Page, D. H. and Seth, R. S. – The problem of pressroom runnability. Tappi Journal, 65 (8): 92–95 (1982).
262.
Clark, J. d’A. – Mill beating and Refining, In: Pulp Technology and Treatment of Paper. Miller Freeman, San Francisco, 1978 516 pgs.
266.
Seth, R. S. – Fiber quality factors in papermaking – II: the importance of fibre coarseness. In: Materials Interactions Relevant to the Pulp, Paper and Wood Industries. Research Society Symposium, San Francisco, 1990 Volume 197 pgs. 143–161.
268.
Lazar, D. R.; Foelkel, C. E. B. and Seiter, D. F. – Effective TCF bleaching of eucalyptus to market brightness. In: International Pulp Bleaching Conference. TAPPI/CPPA/SPCI/EUCEPA, Vancouver:, 1994 pgs. 69–76.
270.
McKenzie, A. W. – The tear-tensile relationship in softwood pulps. Appita, 42 (3): 215 (1989).
281.
Silva Jr., F. G. da e Braga, E. P. – Potencialidade da seleção cde E. urophylla em função da qualidade da madeira destinada à produção de celulose. In: XXX Congresso anual de Celulose e Papel. ABTCP, São Paulo, 1997 pg. 281–292.
289.
Bourmaud, A.; Morvan, C.; Bouali, A.; Placet, V.; Perre, P. and Baley, C. – Relationships between micro-fibrillar angle, mechanical properties and biochemical composition of flax fibers. In: Composites Week @ Leuven and Texcomp Conference, Leuven. 2013 pgs. 2–4.
298.
Paavilainen, L. – Importance of coarseness and fiber length in papermaking. In: Process Engineering Handbook. Ed. Process Engineering Committee of the Engineering Division. Tappi Press, Atlanta, 1992, 2nd Edition Appendix: 98–108.
299.
Seth, R. S. – Beating and refining response of some reinforcement pulps. Tappi Journal, 82 (3): 147–155 (1999).
300.
308.
Paavilainen, L. – Effect of sulphate cooking parameters on the papermaking potential of pulp fibres. Paperi ja Puu, 71 (4): 356–363 (1989).
312.
Gurnagul, N.; Ju, S.; Shallhorn, P. and Miles, K. – Optimizing high-consistency refining conditions for good sack paper quality. Appita Journal, 59 (6): 476–480 (2006).
318.
Singh, S. V. and Rai, A. K. – Suface property inter-relationship in wood-free paper. IPPTA, 5 (4): 9–15 (1993).
319.
Higgins, H. G. – Pulp and paper. In: Eucalyptus for wood production. Ed. Hillis, W. E. and Brown, A. G., CSIRO/Academic Press. London Capitulo 13 pg 290–316.
333.
Moore, G. K. and Jopson, R. N. – The onward march of eucalyptus. Paper 360°, September): 14–15 (2008).
335.
Carvalho, H. G. de; Oliveira, R. C. de; Gomide, J. L. and Colodette, J. L. – Efeito da idade de corte da madeira e de variáveis de refino nas propriedades da celulose kraft branqueada de eucalipto. In: XXXI Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1998 pg. 367–381.
341.
Kibblewhite, R. P. – Qualities of kraft and thermomechanical radiata pine papermaking fibres. In: 8th Fundamental Research symposium. BP&BMA, Oxford, 1985 Volume 1 pgs. 93–131.
343.
Scott, W. E. – Principles of wet end chemistry. Tappi Press, Atlanta, 1996 185 pgs.
354.
Arjas, A.; Huuskonen, J. and Rythi, N – Principles of the evaluation of the performance of a beating-machine and of the beating result. Part II. Paperi ja Puu, 52 (4): 268y, 379 (A1970) and 52 (6): 379 (1970)
365.
Cort, J. B.; Sabourin, M. J. and Musselman, R. L. – Optimized low intensity post refining: lower energy and superior pulp quality. In: III International Refining Conference and Exhibition. PIRA/IPST, Atlanta, 1995 Paper 19 10 pgs.
381.
Ferreira, C.; Fantini Júnior, M.; Oliveira, R.C. de; Colodette, J.L. and Gomide, J.L. – Critérios de seleção de clones para maximizar rendimento e qualidade da celulose. In: Colóquio Internacional sobre Celulose Kraft de Eucalipto, UFV, Viçosa, 2003 pgs. 39–58.
387.
Wang, X.; Maloney, T. C. and Paulapuro, H. – Internal fibrillation in never-dried and once-dried chemical pulps. Appita Journal, 56 (6): 455–459 (2003).
389.
Beck, M. V. – The importance of wet end equipment and its influence on retention. In: Retention of Fines and Fillers During Papermaking. Gess, J. M. Ed. Tappi Press, Atlanta, 1998, Chapter 7 pgs. 129–158.
393.
Baker, C. F. – Good practice for refining the types of fiber found in modern paper furnishes. Tappi Journal, 78 (2): 147–157 (1995).
397.
Rudie, A. W. – Wood and how it relates with wood products. Tappi Journal, 81 (5): 223–228 (1998).
401.
Kimmo, H.; Markku, P. and Håkan, S. – New trends and technology in refining. IPPTA Journal, 24 (1): 109–113 (2012).
402.
Baker, C. F. – Refining review – changes in refining practice with new sources of fibre. World Pulp and Paper Technology: 95–97, 99 (1992).
406.
409.
Lundqvist, S-O. – Efficient wood and fiber characterization – a key factor in research and operation. Annals of Forest Science, 59: 491–501 (2002).)
410.
Demuner, B. J., Ratnieks, E. and Robinson, D. – Ultra low intensity refining of eucalyptus pulps. In: Refining and Mechanical Pulping Conference. PIRA, Barcelona, 2005 Paper 7.
429.
Stark, H. – Pulp properties of TCF pulps. In: Emerging Pulping & Bleaching Technologies Workshop. TAPPI, Durhan, 1995 Section Bleaching III.
433.
436.
437.
Josephson, W.; Jansson, U.; Sezgi, U. S. and Fagerströn, K. – Low consistency refining of a non-conventionally cooked pulp. In: Papermakers Conference. TAPPI, Atlanta, 1999 Book 2 pgs. 729–739.
440.
Lennholm, H. and Iversen, T. – The effects of laboratory beating on cellulose structure. Nordic Pulp and Paper Research Journal, 10 (2): 104–109 (1995).
443.
Scallan, A. M. and Tigerström, A. C. – Swelling and elasticity of the cell walls of pulp fibres. Jornal of Pulp and Paper Science, 18 (5): 188–193 (1992).
450.
452.
Smook, G. A. – Preparation of papermaking stock In: Handbook of Pulp and Paper Thechnologists – Chapter 13. Angus Wilde, 2002. pgs 190–204
454.
456.
Gharehkhani, S.; Sadeghinezhada, E.; Kazi, S. N.; Yarmanda, H.; Badarudina, A.; Safaei, M. R. and Zubir, M. N. M. – Effect of pulp consistency during refining of pulp refining on fiber properties—A review. Carbohydrate Polymers Journal, 115: 785–803 (2015).
459.
463.
Grignon, J. and Scallan, A. M. – The effect of pH and neutral salts upon the swelling of cellulose gels. Journal of Applied Polymer Science, 25: 2829 (1990).
466.
Berthold, J. and Salmén, L. – Effects of mechanical and chemical treatments on the pore-size distribution in wood pulps examined by inverse size-exclusion chromatography. Journal of Pulp and Paper Science, 23 (6): 245–253 (1997).
467.
Dinus, R. J. and Welt, T. – Tailoring fiber properties to paper manufacture: recent developments. Tappi Journal, 80 (4): 127–139 (1997).
468.
Higgins, H. G.; Young, J. de; Balodis, V.; Phillips, F. H. and Colley, J. – The density and structure of hardwoods in relation to paper surface characteristics and other properties. In: Process Engineering Handbook. Ed. Process Engineering Committee of the Engineering Division. Tappi Press, Atlanta, 1992, 2nd Edition Appendix: 77–81.
470.
Waterhouse, J. F. and Riipa, T. – Hardwoods from softwoods? In: III International Refining Conference and Exhibition. PIRA/IPST, Atlanta, 1995 Paper 12 24 pgs.
475.
Clayton, D.; Easty, D.; Einspahr, D.; Lonsky, W.; Malcon, E.; McDonough, T.; Schroeder, L. and Thompson, N. – Part I- chemistry of alkaline pulping. In: Pulp and Paper Manufacture – Alkaline Pulping, Volume 5. Grace, T. M.; Leopold, B.; Malcon, E. W. and Kokureck, M. J. Ed. The Joint Textbook Committee of the Paper Industry, Atlanta/Montreal, 1989, 3th Edition, pgs. 1–128.
478.
Jardim, C. – Variações na densidade básica da madeira versus impacto no processo produtivo. In: 1° Encontro de Operadores de Pátio de Madeira e 5° Encontro de Operadores de Linhas de Fibras. ABTCP. 2019.
493.
Demuner, B. J. Viana Doria, E. L.; Claudio-da-Silva Jr., E. and Manfredi, V. – As propriedades do papel e as características das fibras de eucalipto. In: XXIV Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1991 pgs. 621–641.
496.
Backstrom, M. and Jensen, A. – Modified kraft pulping to high kappa numbers. In: Annual General Conference. APPITA, (cidade: 1999 Volume 1 pgs. 101–109.
502.
El-Hosseiny, F. – Influence of the “Giertz effect” on development of short-span compression strength. Tappi Journal, 81 (2): 177–180 (1996).
511.
Genco, J. M. – Fundamental process in stock preparation and refining. In: Pulping Conference. TAPPI, Orlando, /1999 pgs. 57–95.
529.
Claudio-da-Silva Jr, E. – The Flexibility of pulp fibers – a structural approach. In: International Paper Physics Conference. TAPPI/CPPA, Harwichport, 1983 pgs. 13–25.
530.
531.
Parhan, P. A. – Wood physical properties. In: Pulp and Paper Manufacture – Volume 1 – Properties of Fibrous Raw Materials and Their Preparation for Pulping. Ed. Kocureck, M. J. and Stevens, C. F. B. The Technical Committee of the Paper Industry, Atlanta/Montreal, 1983 pg. 46–54
534.
Evans, R.; Kibblewhite, R. P. and Lausberg, M. – Relationships between wood and pulp properties of twenty-five 13 year old radiata pine trees. Appita Journal, 52 (2): 133–139 (1999).
539.
Dias, R. L. V. and Claudio-da-Silva Jr., E – Pulp and paper properties as influenced by wood density. In: 8th Fundamental Research Symposium. PIRA, Oxford, 1995 pgs. 7–35.
555.
Dowens, G. M. – Wood properties of interest in plantation productivity. In: Sampling Plantation Eucalyptus for Wood and Fibres Properties. Chapter 1. Ed. Dewens, G. M. et al CSIRO Publishing, Collingwood, 1997 pgs. 1–8.
583.
Meltzer, F. P. and Sepke, P.-W. – New ways to forecast the technological results of refining. In: III International Refining Conference and Exhibition. PIRA/IPST, Atlanta, 1995 Paper 2 26 pgs.
588.
Eklund, D. and Lindström, T. – Paper chemistry – An introduction. DT Paper Science Publications, Grankulla, Finland, 1991 305 pgs.
593.
Chauhan, A.; Kumari, A. and Ghosh, U. K. – Blending impact of softwood pulp with hardwood pulp on different paper properties. Tappsa Journal,. 2: 16–22 (2013).
595.
Martinez, P. C. and Park, S. W – Review of physical principles in low consistency refining. O Papel, 73 (8): 65–72 (2012)
606.
MacLeod, M. and Pelletier, L. J. – Basket cases: kraft pulps inside digesters. Tappi Journal, 70 (11): 47 (1987)
610.
Lumiainen, J. – Refining – a key to upgrading the papermaking potential of recycled fibre. Paper Technology,35 (9): 41–44 (1994).
614.
Liu, H.; Jixian Dong. J.; Guo, X.; Jiang, X.; Luo, C.; Xiaohui Tian, X.; Yang, R.; Zhang, L.; Bo Wang, B.; Yan, Y. – Refining characteristics of hardwood pulp using straight and curved bar plates. Journal of Korea TAPPI, 51 (5): 45–60 (2019).
616.
Nazhad, M. M. – Recycled fibre quality – a review. Journal of Industrial and Engineering Chemistry, 11 (3): 314 (2005).
618.
625.
Mariani, S. A.; Marco Torres U.; Alicia Fernández, R. and Eduardo Morales – Efeito da formação de cerne em Eucalyptus nitens na polpação kraft. O Papel, 65 (6): 55–59 (2004).
630.
Westman, L. – Iddling losses in the low-consistency refining of chemical pulp. Svensk Papperstiding, 87 (3): 3–8 (1984).
632.
Havelock, G. – Dynamic simulation of press drying. Paper Technology, 31 (8) (1990).
634.
639.
Seth, R. S. – The effect of fiber length and coarseness on the tensile strength of wet-webs: a statistical geometry explanation. Tappi Journal, 78 (3): 99–102 (1995).
640.
Gao, Y.; Li, K. and Wang, Z. – The influence of pulp furnish components on the property of supercalendered paper. Pulp and Paper Canada, 108 (1): 44–49 (2007).
650.
651.
Yu, Y.; Kettunen, H.; Hiltunen, E. and Niskanen, K. – Comparison of abaca and spruce as reinforcement. In: International Paper Phuysics Conference. TAPPI, Sao Diego, 1999 p. 161–169.
653.
Karnis, A. – The mechanism of fiber development in mechanical pulping. Journal of Pulp and Paper Science, 20 (10): 280–288 (1994).
658.
Ataíde, M. R. and Figueiredo, M. M. L. – Algumas considerações sobre a caracterização de fibras celulósicas. Pasta e Papel (4): 55–58 (1992).
659.
Lumiainen, J. – Energy saving in low consistency refining. Journal of Pulp and Paper Science, 19 (3): J125-J130 (1993).
660.
Dillner, B e Tibbing, P. – Iso-thermal cooking to low kappa numbers facilitates TCF bleaching to full brightness. In: International Non-Chlorine Bleaching Conference. Pulp & Paper/Emerging Technology Transfer, Hilton Head, 1993 Paper 37 27 pgs.
662.
Carlsson, J.; Persson, W.; Hellentin, P. and Malmqvist, L. – The propagation of light in paper: modeling and Monte Carlo simulations. In: International Paper Physics Conference. TAPPI, Niagara-on-the-lake, 1995 pgs. 83–86.
663.
Laivins, G. V. and Scallan, A. M. – Removal of water from pulps by pressing. Part 1: inter- and intra-wall water. Tappi Journal, 77 (3): 125–131 (1994).
667.
Heikkurinen, A.; Levlin, J.-E. and Paulapuro, H. – Principles and methods in pulp characterization – basic fiber properties. Papperi ja Puu, 73 (5): 411–417 (1991).
668.
Lumiainen, J. – Specific surface load theory. In: III International Refining Conference and Exhibition. PIRA/IPST, Atlanta, 1995. Paper 5 15 pgs.
669.
Kibblewhite, R. P. and Bawden, A. D. – Blends of extreme high and low coarseness radiata pine kraft pulps – fibre and handsheet properties. Appita, 43 (3): 199–207 (1990).
672.
Carpim, M. A.; Barrichelo, L. E. G.; Claudio-da-Silva Jr., E. and Dias, R. L. de V. – A influência do número de fibras por grama nas propriedades ópticas do papel. In: XX Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1987 pgs. 183–205.
673.
Kibblewhite, R. P. – Effects of pulp drying and refining on softwood fibre wall structural organizations. In: 9th Fundamental Research Symposium, PIRA, Cambridge, 1989 pgs. 121–152.
676.
Hortal, J. G. – Composicion quimica y estructura de la fibra. In: Constituyentes fibrosos de pastas y papeles. Ed. Escuela Técnica Superior de Ingenieros Industriales de Terrassa, 1988 Capitulo 2 pgs. 11–36.
679.
Ratnieks, E.; Massoquete, A.; Demuner, B.J.; Robinson, D. and DeFoe, R. – Ultra low intensity refining of eucalyptus pulp for papermaking. In: International Pulp Refinig Seminar. HUT, Helsinki (2007) 7 pgs
682.
Schakford, L. D.; Miller, W. J. and Foelkel, C. E. B. – Commercial TCF bleach plant designed and effect of solids and thermal balance on operations. In: XXVII Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1994 pgs. 179–194.
683.
Leskelä, M. – A model for the optical properties of paper. Part 1: theory. Paperi ja Puu, 75 (9–10): 683–688 (1993).
685.
Mark, R. E. – Handbook of physical and mechanical testing of paper and paperboard. Marcel Deckker, Inc., New York, 1984 508 pgs.
687.
Liu, H.; Dong, J.; Jing, H.; Guo, X.; Duan, C.; Qi, K.; Yang, R.; Guo, H.; Wang, B, e Qiao, L. – Refining characteristics of isometric straight bar plates with different bar angles. BioResources, 15 (4): 7844–7860 (2020).
688.
Motamedian, H. R.; Halilovic, A. E. and Kulachenko, A. – Mechanisms of strength and stiffness improvement of paper after PFI refining with a focus on the effect of fines. Cellulose 26: 4099–4124 (2019).
691.
Bäckström, M.; Kolar, M.-C. and Htun, M. – Characterization of fines from unbleached kraft pulps and their impact on sheet properties, Holzforschung, 62 (5): 546–552 (2008).
692.
701.
Ratnieks, E. and Martins, M. A. L. – Eucalyptus refining and white water quality. In: XXXV Congresso Anual. ABTCP, São Paulo, 1992 11 pgs.
702.
Lindström, T. – Chemical factors affecting the behavior of fibres during papermaking. Nordic Pulp and Paper Research Journal, 7 (4): 181–192 (1992).
703.
Scallan, A. M. – The Effect of Acidic Groups on the Swelling of Pulps, Tappi Journal, 66(11), 73 (1983).
704.
Hammar, L-Å; Bäckström, M. and Htun, M. – Efeitos da concentração de eletrólito e do pH na característica de refino de celuloses kraft não branqueadas. O Papel, 63 (8): 79–86 (2003).
705.
Kuitunen; S.; Pulkkinen, I.; Tarvo, V. and Alopaeus, V. – Modeling of fiber swelling. In: 5th ICEP – International Colloquium on Eucalyptus Pulp, Porto Seguro, 2011 9 pgs.
706.
Kuitunen, S., and, Tarvo, V. – Modeling of fiber swelling. In: 5th International Colloquium on Eucalyptus Pulp. Porto Seguro, 2011 9 pgs.
707.
Lobben, H. T. – The tensile stiffness of paper. Part 2: Activation studied by freeze drying. Nordic Skogindustri, 30 (3): 43–48 (1976)
708.
Lindström, T. and Carlsson, G. – The effect of carboxyl groups and their ionic form during drying aon the hornification of cellulose fibers. Svensk Papperstiding,85 (15): 146–151 (1982).
709.
Wang, X., Paulapuro, H. and Maloney, T. C. – Chemical pulp refining for optimum combination of dewatering and tensile strength. Nordic Pulp and Paper Research Journal, 20 (4): 442–447 (2005)
710.
Joris, G. – Optimized fillings for LC refiners. In: III International Refining Conference and Exhibition. PIRA/IPST, Atlanta, 1995 Paper 22 89 pgs.
711.
Stone, J. E. and Scallan, A. M. – The effect of component removal upon the porous structure of the cell wall of wood. Part 2 – swelling in water and the fibre saturation point. Tappi, 50 (10): 496–501 (1967).
712.
Lindström, T. and Kolman, M. – The effect of pH and electrolyte concentration during beating and sheet forming on paper strength. Svensk Paperstiding, 85 (15): 140 (1982).
713.
Katz, S. and Scallan, A. M. – Ozone and caustic soda treatments of mechanical pulps. Tappi Journal, 66 (1): 85–87 (1983).
715.
Scallan, A. M. and Grignon, J. – The efeect of cations on pulp and paper properties. Svensk Papperstiding., 82 (2): 40–47 (1979)
721.
Laivins, G. and Scallan, T. – Acidic versus alkaline beating of pulp. Journal of Pulp and Paper Science, 26 (6): 228–233 (2000).
722.
Babus’Haq, R. F.; O’Callaghan, P. W.; Al-Kader, M. and Nagle, L. – Development of an interative multimedia training package for stock refining in the paper and board industry. In: III International Refining Conference and Exhibition. PIRA/IPST, Atlanta, 1995 Paper 8 6 pgs.
733.
Bäckström, M. and Hammar, L-A – The influence of the counter-ions to the charged groups on the refinability of the never-dried bleached pulps. BioResources, 5(4): 2751–2764 (2010).
734.
Niemelä, K.; Alén, R. and Sjöström, E. – The formation of carboxylic acids during kraft and kraft-anthraquinone pulping of birch wood. Hozforschung, 39: 167–172 (1985).
735.
Sjöström, E. – The origin of charge on cellulosic fibres. Nordic Pulp and Paper Research Journal, 4 (4): 181 (1989).
736.
737.
Choi, K. H.; Kim, A. R. and Cho, B. U. – Effects of alkali swelling and beating treatments on properties of kraft pulp fibers. BioResources, 11 (2): 3769–3782 (2016).
740.
Katz, S.; Liebergott, N. and Scallan, A. M. – A mechanism for the alkali strengthenin of mechanical pulps. Tappi Journal, 64 (7): 97–100 (1981).
742.
Levlin, J. E. – Some differences in the beating behavior of softwood and hardwood kraft pulps. In: International Symposium on Fundamental Concepts of Refining. IPC, Appleton, 1980.
745.
Fiskari, J. – Oxalic acid formation in oxygen chemical bleaching. In: Pulping Conference. TAPPI, Orlando, 1999, volume 2, pgs. 7–10.
747.
Keckes, J.; Burgert, I.; Fruhmann, K.; Muller, M.; Kolling, K.; Hamilton, M.; Burghammer, M.; Roth, S.V.; Stanzl-Tschegg, S. and Fratzl, P. – Cell-wall recovery after irreversible deformation in wood. Natural Materials, 2: 810–814 (2003).
748.
Vázquez, G.; López, M.; González, J. and Antorrena, G. – Adsorption of sodium on O2-prebleached Eucalyptus globulus Kraft pulp. Solutions, 85 (1): 1–3 (2002).
749.
Torgnysdotter, A. and Wågberg, L. – Influence of electrostatic interactions on fibre/fibre joint and paper strength. Nordic Pulp and Paper Research Journal, 19 (4): 440–447 (2004).
750.
Evans, B. E. – The effect of process water on paper properties. Paper Technology Ind., 22 (3): 99 (1981).
752.
753.
Wang, F. and Hubbe, M. A. – Charge properties of fibers in the paper mill environment. 1. effect of electrical conductivity. Journal of Pulp Paper Science, 28 (10): 347–353 (2002).
764.
Hiltunen, E. – Papermaking properties of pulp. In: Papermaking Science and Technology. Volume 17 – Pulp and paper testing, Chapter 3, Ed. Gullichsen, J. and Paulapuro, H. Finnish Paper Engineers’ Association/Paperi ja Puu Oy, Hesinki: 1999.
765.
Lumiainen, J. – Comparison of the mode of operation between conical and disc refiners. In: IV International Refining Conference. PIRA, Fiuggi, 1997 Paper 14 pgs. 227–236.
766.
Lee, J-Y.; Kim, C-H.; Kwon, S.; Park, H-H.; Yim, H-T.; Gu, H-G. and Min, B-G. – Study of mixed refining behaviors of softwood kraft pulps and hardwood kraft pulps using different bar fillings. Journal of Korea TAPPI, 50(5): 31–38 (2018).
771.
Mayr, M.; Eckhart, R.; Winter, H. and Bauer, W. – A novel approach to determining the contribution of the fiber and fines fraction to the water retention value (WRV) of chemical and mechanical pulps. Cellulose 24: 3029–3036 (2017
772.
Koskenhely K.; Ämmälä, A.; Jokinen, H. and Paulapuro, H. – Effect of refining intensity on pressure screen fractionated softwood kraft. Nordic Pulp and Paper Research Journal, 20 (2): 169–175 (2005).
773.
Bäckström, M.; Lindblom, A. T. and Wågberg, L. – Studies of the influence of deflocculants and flocculants on the refining efficiency on a pilot scale. Nordic Pulp and Paper Research Journal, 24 (3): 319–326 (2006)
798.
Springer, A.; Nabors, L. A. and Bhatia, O. – The influence of fiber, sheet structual properties and chemical additives on wet pressing. Tappi Journal, 74 (4):221 (1991).
801.
Santos, A.; Amaral, M. E.; Vaz, A.; Anjos, O. and Simões, R. – Effect of Eucalyptus globulus wood density on papermaking potential. Tappi Journal, 7 (5): 25–32 (2008).
803.
Bentley, R. G.; Hamilton, R. K. and Jack, J. S. – An optical method for monitoring pulp refining. Journal of Pulp and Paper Science, 23 (10): 504–509 (1997).
815.
Shekhar, C. D. – Fine edged parallel and curved bar plates in refining system for pulp and paper industries. IPPTA Journal, 24 (1): 115–119 (2012).
816.
Shekhar, C. D. – Fine bar technology in refining system for pulp and paper industries. IPPTA Journal, 22 (3): 109–112 (2010).
817.
Arjas, A. – Effect of the evenness of the pulp bleaching stage on fibre bonding. Paperi Ja Puu, 52 (12): 825–829 (1970).
824.
Allison, R. W.; Ellis, M. J. and Wrathall, S. H. – Interaction of mechanical and chemical treatments on pulp strength during kraft pulp bleaching. Appita Journal, 51 (2): 107–113 (1998).
828.
Duker, E. and Lindström, T. – On the mechanisms behind the ability of CMC to enhance paper strength. Nordic Pulp and Paper Research Journal, 23 (1): 57–64 (2008).
829.
830.
Stoere, P.; Nazhad, M. and Kerekes, R. J. – An experimental study of the effect of refining on paper formation. Tappi Journal, 84 (7): 52–58 (2001)
836.
Steenberg, B. – A model of refining as a special case of milling. In: International Symposium on Fundamental Concepts of Refining. IPC, Appleton, 1980 pgs 107.
837.
Koskenhely, K.; Ämmälä, A.; Jokinen, H. and Paulapuro, H. – Refining characteristics of softwood fibre fractions. In: 13th Fundamental Research Symposium – Advances in Paper Science and Technology Cambridge. 2005 pgs. 427–456.
838.
Manfredi, V. and Claudio-da-Silva Jr, E. – Refining operating variables vs raw material. In: International Conference – Advances in Refining Technologies. PIRA, Birmingham, 1986 41 pgs.
839.
Joy, E.; Robinson, D. and Mathew, J. – Deformation of fiber flocs in refining. In: Papermakers Conference. TAPPI, 2001 5 pgs.
840.
Holik, H. – Mais rápidas, mais largas, melhores – progresso em máquinas de papel nos últimos 100 anos. O Papel, 71 (8): 66–93. (2010)
841.
Rihs, J. and Josephson, W. E. – Refining systems with flow recirculation. In: IV International Refining Conference. PIRA, Fiuggi, 1997 Paper 7 pgs. 117–124.
865.
Almeida, M. D. de; Sevrini, G. I.; Leodoro, L. M., Faez, M. S., Soto, M. R., Kaneco, S. Y. – Tratamento mecânico de fibra curta de eucalipto com utilização de discos de refino com maior comprimento de corte. O Papel, 66 (6): 80–87 (2006).
866.
El-Sharkawy, K.; Haavisto, S.; Koskenhely, K. and Paulapuro, H. – Effect of fiber flocculation and filling design on refiner loadability and refining characteristics. BioResources, 3 (2):403–424 (2008).
867.
Batchelor, W., Lundin, T. and Fardim, P. – A method to estimate fiber trapping in low-consistency refining. Tappi Journal, 5 (8): 31–36 (2006).
868.
Demuner, B. J.; Viana Doria, E. L.; Claudio-da-Silva Jr., E. and Manfredi, V. – Influência das características dos flocos sobre o refino de polpas químicas. O Papel, 54 (2): 29–39 (1993).
870.
Lumiainen, J. – Behavior of fibres in mixed low consistency refining. Paper Technology, 38 (6): 26–33 (1997).
871.
Lumiainen, J. – Refining performances with separated and mixed pulps for fine-paper production. Revue ATIP, 51 (3): 99–107 (1997).
872.
Joris, G. – Optimization of industrial refining unit through Fibrologic 4.0. In: IV International Refining Conference. PIRA, Fiuggi, 1997 Paper 17 pgs. 267–303.
875.
Lumiainen, J. – Refining of fine paper fibers – separate or mixed refining?. In: Papermakers Conference. TAPPI, Philadelphia, 1996 pgs. 175–186.
877.
Stevens, W. V. – Principles of stock preparation and refining – refiners and refiner systems. In: Pulping Conference. TAPPI, Orlando, 1999, pgs. 97–102.
879.
Lundin, T.; Lönnberg, B.; Soini, P. and Harju, K – Laboratory LC-refining of SBK pulps: effects of pulp consistency and dispersion. In: Scientific and Technical Advances in Refining & Mechanical Pulping – Course Notes. PIRA, Stockholm, 2003 Paper 5.
880.
Bajpai, P. – Technology developments in refining. Pira International Ltd. Surrey, UK. 140 pgs (2005).
884.
886.
Gabl, H. and Gorton-Heulgerth, A. – A new low consistency refiner yields improved fibre properties while reducing idle energy by up 40%. In: Scientific and Technical Advances in Refining & Mechanical Pulping – Course Notes. PIRA: Stockholm, 2003 Paper 8.
895.
Dillen, S. – Heterogeneity – An Important Parameter in Low Consistency Refining. In: International Symposium of Fundamental Concepts of Refining. IPC, Appleton: 16-18/09/1980 pgs. 331.
908.
Olson, J. A.; Robertson, A. G.; Finnigan, T. D. and Turner, R. R. H. – An analyzer for fibre shape and length. Journal of Pulp and Paper Science, 21 (11): 367–373 (1995).
911.
924.
Lindau, J.; Theliander, H. and Sjöström, K. – The compression of pulp before and during brown stock washing – Its influence on fibre properties. Nordic Pulp and Paper Research Journal, 23 (2): 195–201 (2008).
936.
Page, D. H. and Tydeman, P. A. – Transverse swelling and shrinkage of softwood tracheids. Nature, 199 (4892): 471–472 (1963).
937.
Kibblewhite, R. P. and Bailey, D. – Measurement of fibre cross-section dimensions using image processing. Appita Journal, 41 (4): 297–303 (1988).
938.
Seth, R. S. – The difference between never dried and dried chemical pulps. Solutions, 1 (1): 95 (2001).
946.
Arroyo, L. M. – Optimización energética de una fábrica de papel de nueva planta. El Papel (46): 35–39 (1995).
983.
Glowacki, J. J. – Refiners: new designs achieved higher efficiency/capacity. Pulp and Paper 70, (1): 113–114 (1996).
988.
Arjas, A.; Aario, M. and Rythi, N. – Influence of the residence time distribution on the beating result of a Mill-size conical refiner. Paperi ja Puu, 52 (10): 639–649 (1970)
1011.
Batchelor, W. J. and Kibblewhite, R. P. – Calculation of relative bonded area and scattering coefficient from sheet density and fibre shape. Holzforschung, 60 (3): 253 (2006).
1015.
Martinez, P.C. and Park, S. W. – Ações das forças em processo de refino em baixa consistência. In: 40th Congresso Anual. ABTCP: São Paulo, 2007 12 pgs.
1016.
Anand, S. H.; Manigandan, P.; Kumar, S. and Jeffrey, J. E. C. – Design and manufacturing of disc refiner. International Journal of Emerging Technology in Computer Science and Electronics, 21 (3): 79–82 (2016)
1017.
Banks, W. A. – Design considerations and engineering characteristics of disc refiners. Paper Technology, 8 (4): 363–369 (1967).
1018.
Stationwala, M. I.; Atack, D. and Karnis, A. – Distribution and motion of pulp fibres on refiner bar surface. Journal of Pulp and Paper Science, 18 (4): 131–137 (1992).
1019.
Atalla, R. H. and Wahren, D. On the energy requirement in refining. Tappi, 63 (6): 121 (1980).
1022.
Demler, C. L. – Fundamentals of papermill refining for chemical, mechanical and secondary fibers. In: TECH95 Theory & Practice of Papermaking Course. CPPA;. Ottawa, 1995 Section A2 23 pgs.
1024.
1026.
Kerekes, R. J. – Characterizing the refining action – linking the process to the refining result. In: Refining and Mechanical Pulping Conference. PIRA, Barcelona, 2005 Paper 1.
1027.
Martinez, M. and Kerekes, R. J. – Forces on fibres in low-consistency refining. Tappi Journal, 77 (12): 119–123 (1994).
1028.
Nissan, A. H. – Lectures on fiber science in paper. Edited by W.C. Walker, Pulp and Paper Technology Series. Joint Textbook Committee of the Paper Industry. N°4. p27
1032.
Kerekes, R. J. – Energy and forces in refining. Journal of Pulp and Paper Science, 30 (1): 10–15 (2010).
1033.
Kerekes, R. J. – Force-based characterization of refining intensity. Nordic Pulp and Paper Research Journal, 26 (1): 14–20 (2011).
1035.
Martinez, M.; Batchelor, W. J.; Kerekes, R. J. e Ouellet, D. – Forces on fibres in low-consistency refining: normal force. Journal of Pulp and Paper Science, 23 (1): J11–J18 (1997).
1036.
Batchelor, W. J.; Martinez, M.; Kerekes, R. J. and Ouellet, D. – Forces on fibres in low-consistency refining: shear force. Journal of Pulp and Paper Science, 23 (1): J40–J45 (1997).
1039.
Joris, G. – Gestion optimale d’une unite industrielle de raffinage. Revue ATIP, 61 (2): 6–25 (2007).
1040.
Kerekes, R. J. – Characterizing refining action in PFI mills, Tappi Journal, 4 (3): 9–13 (2005).
1047.
Mason, S. G. – Some factors involved in the flocculation of pulp suspension and the formation of paper. Pulp and Paper Magazine Canada, 52 (51): 94–98 (1950).
1049.
Molin, U. and Daniel, G. – Effects of refining on the fibre structure of kraft pulps as revealed by FE-SEM and TEM: influence of alkaline degradation. Holzforschung, 58 (3): 226–232 (2004).
1051.
Ebeling, K. – A critical review of current theories for the refining of chemical pulps. In: International Symposium of Fundamental Concepts of Refining. IPC, Appleton, 1980 pgs. 1–33.
1052.
Gassman, H. – Influences on the screening and fractionating processes. World Pulp and Paper Technology, 1998/9: 40–41.
1055.
Senger, J. and Ouellet, D. – Factors affecting the shear forces in high-consistency refining. Journal of Pulp and Paper Science, 28 (11): 364–368 (2002).
1057.
Hietanen, S. and Ebeling, K. – Fundamental aspects of the refining process. Paperi ja Puu, 72 (2): 158–170 (1990)
1059.
Kure, K. A.; Saborin, M. J.; Dahlqvist, G. and Helle, T. – Adjusting refining intensity by changing refiner plate design and rotational speed-effects on structural fibre properties. Journal of Pulp and Paper Science, 26 (10): 346–352 (2000).
1063.
1066.
Meltzer, F. P. and Rauntnbach, R. – Neue möglichkeiten zur vorherbestimmung des technologischer mahlergebnisses. Das Papier, 47 (3): 578–583 (1994).
1067.
Sepke, P.-W.; Meltzer, F. P. and Musselmann, W. – Influencing specific energy in low consistency refining – a new approach. In: III International Refining Conference and Exhibition. PIRA/PST, Atlanta, 1995 Paper 21.dillen
1068.
Crow, H. – Energy saving in the refining of shor fibre pulps. In: Papermakers Conference. TAPPI, Philadelphia, 1996 pg. 9.
1073.
Kerekes, R. – Characterization of pulp refiners by a C-factor. Nordic Pulp and Paper Research Journal, 05 (1): 3–8 (1990).
1075.
Lumiainen, J. – New theory can improve practice. Pulp and Paper International, 32 (8): 46–47, 54 (1990).
1076.
Kerekes, R. J.; Clara, M.; Dharni, S. and Martinez, M. – Application of the C-factor to characterize pulp refiners. Journal of Pulp and Paper Science, 19 (3): J125–130 (1993).
1077.
Kerekes, R. J.; Ouellet, D. and Martinez, M. – New perspectives on refining intensity. In: III International Refining Conference and Exhibition. PIRA/IPST, Atlanta, 1995 Paper 3 23 pgs.
1078.
Musselman, R.; Letarte, D. and Simard, R. – Trial stage low consistency refining o TMP for energy savings and quality enhancement. In: IV International Refining Conference. PIRA, Fiuggi, 1997 Paper 9 pgs. 141–147.
1080.
Lumiainen, J. – Refining intensity at low consistency – critical factors. Paper Technology, 32 (11): 22–26 (1991).
1082.
Kerekes, R. and Meltzer, F. – The influence of bar width on bar forces and fibre shortening in low consistency pulp refining. Nordic Pulp & Paper Research Journal 33(2): 220–225 (2018).
1084.
Berna, J. E. R.; Martinez, M. and Olson, J. – Power–gap relationships in low consistency refining. Nordic Pulp and Paper Research Journal, 34 (1): 36–45 (2019).
1085.
1086.
1087.
1089.
Lundin, T.; Wurlitzer, F.; Park, S. W. and Fardim, P. – Análise energética em refinação de baixa consistência de madeira de coníferas. O Papel, 70 (10): 41–60 (2009).
1090.
Kurdin, J. A. – High consistency refining of chemical (pulp) fibres. In: Refining Chemical Pulps Seminar. Doschi Association, Appleton, 1986 pg 15.
1091.
Lumiainen, J. – Refining of chemical pulp. In: Papermaking Science and Technology. Volume 8 – Papermaking Part 1 – Stock preparation and wet end, Chapter 4. Ed. Gullichsen, J. and Paulapuro, H. Finnish Paper Engineers’ Association/Paperi ja Puu Oy, Hesinki: 2000 pg. 86.
1092.
1093.
Min, B. G.; Lee, J. Y.; Kim, C. H.; Park, S. H.; Lee, M. S.; Gu, H. G. and Lee, C. Y. – New technology for developing a lightweight refiner plate for hardwood kraft pulp fibers. BioResources, 15 (4): 9128–9142 (2020).
1096.
Baker, C. F. – Optimization of paper mill refining systems. In: 3rd International Refining Conference. PIRA/IPST, Atlanta, 1995 Paper 13.
1097.
Rihs, J. – Low consistency refining – theory vs practice. In: III International Refining Conference and Exhibition. PIRA/IPST, Atlanta, 1995 Paper 10 15 pgs.
1099.
Radoslavova, D.; Roux, J. C. and Silvy, J. – The beating of pulp considered as a hydrodynamic process. In: III International Refining Conference and Exhibition. PIRA/IPST, Atlanta, 1995 Paper 6 32 pgs.
1100.
Crook, J. – The dream revisited – an update on Brazilian refining technology. In: III International Refining Conference and Exhibition. PIRA/IPST, Atlanta: 20-22/03/1995 Paper 14 12 pgs.
1101.
Luengo, J.; Segura, C. and González, R. – Effect of refining intensity on properties of eucalyptus fibers – Santa Fe pulp – CMPC. In: 8th International Colloquium on Eucalyptus Pulp, Concepción, 2012 28 slides
1102.
Lumiainen, J. – Is the lowest refining intensity the best in the consistency refining of hardwood pulps? In: Papermakers Conference, Atlanta, 1994. 12 pgs.
1104.
Baker, C. F. – Various options for the control of refining process. In: IV International Refining Conference. PIRA, Fiuggi: 18-20/03/1997 Paper 16 pgs. 249–264.
1105.
Baker, C. F. – Critical review of refiner theory. In: III International Refining Conference and Exhibition. PIRA/IPST, Atlanta: 20-22/03/1995 Paper 7 22 pgs.
1106.
Ratnieks, E. and Demler, C. – O refino da polpa de eucalipto. O Papel, 54(8):22–25 (1993).
1107.
Welch, L. V. and Kerekes, R. J. – Characterization of the PFI mill by t
1108.
Berger, T. H. – The impact of plate material on pulp quality over time. In: IV International Refining Conference. PIRA, Fiuggi: 18-20/03/1997 Paper 18 pgs. 307–315.
1109.
Mayade, T. L. – Statistical theory of chemical pulp refining: an innovative combined approach. Appita Journal, 50 (3): 237–244 (1997).
1110.
Li, S.; He, H. Z.; Yu, G. F. and Wei, Y. S. – Study on thickening-refining with a low-consistency disk refiner. China Pulp and Paper, 13 (2): 29–34 (1994.
1111.
Baker, C. F. – Optimisation of refining in fine and speciality paper mill systems. In: Papermakers Conference. TAPPI, Philadelphia: 24-27/03/1996 pgs. 215–224.
1112.
Levlin, J. E. – Characterisation of Beating Result. In: International Symposium of Fundamental Concepts of Refining. IPC, Appleton: 16-18/09/1980 pgs. 131.
1113.
Baker, C. F. – The refining of nonwood fibres. In: IV International Refining Conference. PIRA, Fiuggi: 18-20/03/1997 Paper 10 pgs. 151–180.492. Prasad, D. Y.; Jameel, H. and Gratzl, J. – Extended delignification of hardwood with AQ/Polysulfide. Tappi Journal, 78 (9): 151 (1995).
1114.
Pycraft, C. – The optimization of energy consumption and strength during refining. Paper Southern Africa, 6: 6–8, 10, 14 (1986).
1115.
Manfredi, V.; Vilela, C. B. and Claudio-da-Silva Jr. E. – Efeito das variáveis operacionais de refino na evolução das propriedades da polpa refinada. In: Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1986 pgs. 189–207.
1116.
Manfredi, V. – Optimizing eucalyptus pulp refining. In: International Papermaking & Environment Conference. Ed. Yang, S.; Ni, Y e Liu, Z. Tianjin University of Science and Technology, Tianjin – China: 12-14/05/2004 Book A pgs. 41–50.
1117.
Lundin, T.; Batchelor, W. and Fardim, P. – Fiber trapping in low-consistency refining: new parameters to describe the refining process. Tappi Journal, 7 (7): 15–21 (July 2008).
1118.
Shekhar, C. D. – Fine edged parallel and curved bar plates in refining system for pulp and paper industries. IPPTA Journal, 24 (1): 115–119 (2012).
1119.
Ratnieks, E. and Mora, E. – How the dryness of pulp influences the stock preparation. In: XXVI Congresso Anual de Celulose e Papel, ABTCP, São Paulo, 1993 pgs. 715–731.
1121.
Page, D. H. – The beating of chemical pulps – the action and the effects. In Fundamentals of Papermaking, Trans. of the IXth Fund. Res. Symp. Cambridge, 1989, pgs. 1–38.
1125.
Sha, J.; Nikbakht, A.; Wang, C.; Zhang, H. and Olson, J. – The effect of consistency and freeness on the yield stress of chemical pulp fibre suspensions. BioResources, 10(3), 4287–4299 (2015).
1126.
Koskenhely, K.; Nieminen, K. and Paulapuro, H. – Edge form profile of refiner filling bars and its impact on softwood fibre shortening. Paperi ja Puu – Paper and Timber, 89 (4): 1–6 (2007).
1127.
1129.
Fox, T. S.; Brodkey, R. S. and Nissan, A. H. – High-speed photography of stock transport in a disk refiner. Tappi Journal, 62 (3): 55–58 (1979)
1130.
Fox, T. S. – Inside a disc refiner. In: International Symposium of Fundamental Concepts of Refining. IPC, Appleton, 1980 pgs. 281–313.
1133.
Baker, C. F. – Specific edge load theory – application and limitations. In: Current and Future Technologies of Refining Conference. PIRA, 1991 Volume 2 pg. 18.
1135.
Parola, M. J. and Linna, H. I. – Runnability and the unstable stress fields in paper web. Graphics Arts, 29 (3): 9 (2000).
1137.
Kibblewhite, R. P. – Refining requirements of softwood and eucalypt market pulps and blends. Appita Journal, 47 (5): 375–379, 401 (1994).
1138.
Saltarelli, M. O. – Stock preparation process requirements. Tappi, 57 (7): 83–85 (1974).
1140.
1141.
Chauhan, V. S.; Kumar, N.; Kumar, M.; Chakrabarti, S. K. and Thapar, S. K. – Effect of separate and mixed refining of hardwood and softwood pulps on paper properties. Journal of Korea TAPPI, 43 (4): 1–10 (2011).
1142.
Panthai, S. and Somboon, P. – Examination of separate and mixed refining methods on softwood and hardwood pulps for linerboard production. Kasetsart Journal – Natural Science, 48: 540–547 (2014).
1143.
Brindley, C. L. and Klibbewhite, R. P. – Comparison of refining response of eucalypt and a mixed hardwood pulp and their blends with softwood. Appita, 49 (1): 37–49 (1996).
1145.
Kerekes, R. J. and Tam Doo, P. A. – The effect of beating and low-amplitude flexing on pulp fibre flexibility. Journal of Pulp and Paper Science, 15 (1): 36 (1989).
1150.
Yasumura, P. K. and Park, S. W. -Novos aspectos sobre ações de refino do moinho PFI e refinadores industriais de disco em fibras. In: 45th ABTCP International Pulp and Paper Congress e VII IberoAmerican Congress on Pulp and Paper Research. São Paulo, 2012 8 pgs
1151.
1155.
Ouellet, D.; Bennington, C. P. J.; Senger, J. J.; Borisoff, J. F. and Martiskainen, J. M. – Measurement of pulp residence time in a high-consistency refiner. Journal of Pulp and Paper Science, 22 (8): J301–305 (1996).
1156.
Bordin, R.; Toux, J-C. and Block, J-F. – No-load characterization of a low-consistency disc refiner for na efetive application of refining theories. Engineering, Pulping and Environmental Conference, TAPPI, TAPPI Engineering, Pulping and Environmental Conference, Jacksonville, 2007 33 pgs.
1159.
Hietanen, S. – The role of fiber flocculation in chemical pulp refining. Paperi ja Puu, 73 (3): 249–259 (1991).
1160.
Page, D. H., Kosky, J. and Booth, D. – Some initial observations on the action of the beater. BP&BIRA Bulletin, 28: 15–21 (1962).
1161.
Waterhouse, J. F. – Characterizing pulps for paper-machine runnability. In: Engineering/Process and Product Quality Conference & Trade Fair. TAPPI, Anaheim, 1999 Volume 3 pgs. 1195–1204.
1162.
Liu, H.; Dong, J.; Jing, H.; Guo X.; Duan, C.; Qi, K.; Yang, R.; Gio, H.; Wang, B. and Qiao, L. – Correlation between bar angle and characterization parameters of the isometric straight bar plate. BioResources 15 (4), 7844–7860 (2020).
1163.
Eriksen, O.; Holmqvist, C. and Mohlin, U-B. – Fibre floc drainage – a possible cause for substantial pressure peaks in low-consistency refiners. Nordic Pulp and Paper Research Journal, 23 (3): 321–326 (2008).
1165.
Wittberg, L. P.; Björkman, M.; Khokhar, G.; Mohlin, U-B. and Dahlkild, A. – Flow conditions in the grooves of a low-consistency refiner. Nordic Pulp & Paper Research Journal, 27 (2): 173–183 (2012).
1166.
Fox, T. S.; Brodkey, R. S. and Nissan, A. H. – Inside a disk refiner. Tappi Journal, 65 (7): 80–83 (1982).
1167.
Groome, E. J. and Gerhardt, T. D. – Fiber retention time in a disk refiner. In: International Symposium on Fundamental Concepts of Refining. IPC, Appleton, 1980. pgs. 21–29.
1168.
Bordin R.; Roux, J.-C. and Bloch, J.-F. – New technique for measuring clearance in low-consistency refiners. Appita Journal, 61 (1): 71–77 (2008).
1170.
Arjas, A. – Influence of residence time distribution on pulp properties. In: International Symposium of Fundamental Concepts of Refining. IPC, Appleton, 1980 pg 61
1183.
Lumiainen, J. – Post-refining of mechanical pulps. In: IV International Refining Conference. PIRA, Fiuggi, 1997 Paper 8 pgs. 127–137.
1184.
Steffens, D. – Ultrasonic technology – measurements of paper orientation and elastic properties. In: XXVII Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1994 pgs. 661–681.
1187.
Basile, F. C. – Energy considerations in stock preparation refining. Tappi Journal, 97 (4): 84–88 (1984).
1192.
Vainio A. K. and Paulapuro, H – Interfiber bonding and fiber segment activation in paper. Bioresources, 2 (3):442–458 (2007).
1194.
Heitmann, J. A. – Pulp properties. In: Pulp and Paper Manufacture – Mill Control & Control Systems: Quality & Testing, Environmental, Corrosion, Electrical. Ed.: Kouris, M e Kocurek, M. J. The Textbook, Committee of the Paper Industry, Atlanta/Montreal, 1992, pgs. 85–98.
1199.
Curto, J.; Simões, R. and Silvy, J. – The influence of bleaching, beating and drying in the wet fibre flexibility of Pinus pinaster kraft pulp. In: 12th International Symposium on Wood and Pulping Chemistry. Madison, 2003 Volume 3 pgs. 287–289.
1213.
Mohlin, U.-B. and Wennberg, K. – Some aspects of the interaction between mechanical and chemical pulps. Tappi Journal, 67 (1): 90–93 (1984).
1215.
Kure, K. A. and Dahlqvist, G. – Development of structural fibre properties in high intensity refining. Pulp and Paper Canada, 99 (7): 59–63 (1998).
1216.
Lonnberg, B. – Energy balance in low consistency (LC) refining. In: Refining and Mechanical Pulping conference. PIRA, Barcelona, 2005 Paper 7.
1217.
Turt, V.; Genco, J. M. and Co A. – Effect of refining on fiber properties. In: Engineering Conference. TAPPI, San Francisco, 1994 pg. 273–280.
1220.
Joris, G. and Roux, J-C. – The dynamic freeness tester. In: Scientific and Technical Advances in Refining & Mechanical Pulping – Course Notes. PIRA: Stockholm, 2003 Paper 6.
1223.
Wultsch, F e Flucher, W. – Small Escher-Wyss refiner as a standard testing instrument for modern stock preparation plants. Das Papier, 12 (13/14): 334–342 (1958).
1224.
Brecht, W. and Siewert, W. H. – Zur theoretish technischen beurteilung des mahlprozesses. Das Papier, 20 (1): S4–14. (1966).
1225.
Brecht, W. – A method for the comparative evaluation of bar-equipped beating devices. Tappi, 50 (8): 40–44 (1967).
1227.
Bian, L.; Liu, S.; Pu, Y.; Liu, C. and Yuan, L. – Appraisal of a disk refiner performance. Guowai Zaozshi, 16 (1): 28–31 (1997) according to ABIPST, 68 (2): 123 reference 1409(AS).
1229.
Fan, X.; Jeffrey, D. J. and Ouellet, D. – A stochastic model for the residence time of pulp in a single-disc chip refiner. Journal of Pulp and Paper Science, 20 (11): 343–349 (1994).
1232.
Tonoli, G. H. D.; Teixeira, E. M.; Corrêa, A. C.; Marconcini, J. M.; Caixeta, L. A.; Silva, M. A. P. da e Mattoso, L. H. C. – Cellulose micro/nanofibres from eucalyptus kraft pulp: Preparation and properties. Carbohydrate Polymers, 89 (1): 80–88 (2012).
1233.
1235.
Khlebnikov, A. A.; Pashinnskii, V. F.; Gonharov, V. N. and Smirnova, E. A. – Analysis of the forces involved in the operation of a conical refiner. Tr. Leningr., 22: 129–136 (1969) [1039, 1163].
1236.
Goncharov, V. N.; Smirnova, E. A. and Shemyakin, E. V. – Method for the determination of stresses between refiner blades. Bumazh. Prom. (27): 134–138 [1163]
1237.
Goncharov, V. N. – Force factors in a disk refiner and their effect on the beating process. Bumazh. Prom., (5): 12–14 [1163]
1238.
Koskenhely K.; Nieminen, K.; Hiltunen, E. and Paulapuro, H. – Comparison of plate and conical fillings in refining of bleached softwood and hardwood pulps. Paperi ja Puu, 87 (7): 458–463 (2005).
1241.
Stephansen, E. – Contribution to the understanding of the mechanism of the beating process. Norsk Skogindustri, 21 (8): 266 (1967).
1242.
Odabas, N.; Henniges, U.; Potthast, A. and Rosenau, T. – Cellulosic fines: properties and effects. Progress in Materials Science, 83: 574–594 (2006).
1253.
1255.
1271.
Page, D. H. – The axial compression of fibres – a newly discovered beating action. Pulp and Paper Magazine Canada, 67 (1): 2–12 (1966
1275.
Bhardwaj, N. K. – Refining of bamboo long fiber fraction pulp effects on wet web and dry strength properties of paper. Cellulose Chemistry and Technology, 53 (1–2): 113–120 (2019).
1280.
Yasumura, P. K.; D’Almeida, M. L. O. and Park, S. W. – Multivariate statistical evaluation of physical properties of pulps refinied in a PFI mil. O PapeL, 73 (3): 59–65 (2012)
1286.
Goncharov, V. N. – Stostoyanie i perspektivy sovershnstvovaniya oborudovaniya dlya razmola voloknistykh materialov. Tsellyul. Bum. Karton, 7/8: 20–24 (1995) according to ABIPST, 67 (9): 1337 reference 12645(AS)
1291.
Rissato, T. C. – Influência do refino de baixa intensidade no consumo energético e nas propriedades do papel. Monografia Latu-sensu. Universidade Federal de Viçosa, Viçosa, 2010 71 pgs
1295.
Levlin, J. E. – The response of different fibre raw materials to refining. In: Advances in Refining Technologies Conference. PIRA, Birmingha, 1986.
1307.
Olejnik, K. – Impact of pulp consistency on refining process conducted under constant intensity determined by SEL and SEC factors. BioResources, 8(3): 3212–3230 (2013).
1308.
Claudio-da-Silva Jr., E. – Chemical pulp beating related to fiber structure. Doctoral Thesis, College of Environmental Science and Forestry, Syracuse, 1991 295 pgs.
1313.
Kerekes, R. J. and Senger, J. J. – Characterizing refining action in low-consistency refiners by forces on fibres. Journal of Pulp and Paper Science, 32 (1): 1–8 (2006).
1314.
van den Akker, J. A. – Energy considerations in the beating of pulp. In: Trans. Fund. Res. Symposium. Ed. F. Bolam, BPBMA, Cambridge, 1957 pgs. 435–446.
1315.
Bordin, R.; Roux, J-C. and Bloch, J-F. – No-load power evolution during low-consistency pulp beating. Nordic Pulp and paper Research Journal, 23 (1): 34–38 (2008).
1316.
Amero, B. A. – Refining optimization single-pass refiners versus multiple-pass laboratory beaters. In: International Symposium on Fundamental Concepts of Refining. IPST, Appleton, 1980 pg. 179
1317.
Liu, H.; Dong, J.; Qi, K.; Guo, X.; Yan, Y, Qiao, L.; Duan, C. and Zhao, Z. – The effect of pulp properties on the consumption in low consistency refining. Journal of Korean Wood Science and Technology, 48 (6): 869–877 (2020)
1318.
Kerekes, R. J. – A theoretical analysis of recirculation in pulp refiners. Tappi Journal, 13 (4):29–32 (2014).
1319.
Kral, P.; Klimek, P. and Mishra, P. K. – Effect of refiner plate pattern design on refined fibre size distribution – a time series study. Drvna Industrua, 66 (1): 63–67 (2015).
1320.
Liu, H.; Dong, J.; Guo, X.; Wang, B.; Lijie, Q.; Chuanwu Duan, C.; Kai Qi, K.; Kong, L. – No-load power of disc refiner in low consistency refining. Journal of Korea TAPPI, 52(2): 87–96 (2020).
1321.
Oslon, J.; Allison, B.; Friesen, A. and Petrs, C. – Fibre fractionation for high porosity sack paper. Tappi Journal, 84 (6): 1-xx (2001).
1328.
Hill, H. S.; Edwards, J. and Beath, L. R. – Curlated pulp – a new approach to pulp processing. Tappi, 33 (1):36 (1950
1329.
Herbert, W.; Marsh, P. G. and Harbron, D. L. – New kinks in refining with the chemifiner. Paper Trade Journal, 42 (1967)
1333.
McKenzie, A. W. and Prosser, N. A. – The beating action of a PFI Mill. Appita Journal, 34 (4): 239–297 (1981).
1336.
Arjas, A. – Residence time distribution in conical refiners and refining systems. In: International symposium of Fundamental Concepts of Refining. Appleton, 1980 pgs. 8–20.
1338.
Lindström, T. – Der einfluss chemischer factoren auf faserquellung und papierfestigkeit. Das Papier, 34 (12): 561 (1980)
1342.
1356.
Meltzer, F. P. – Reducing specific energy in refining with a new key figure and innovative fillings materials. In: Papermakers Conference. TAPPI, Philadelphia, 1996 pgs. 187–194.
1359.
Harju, K. and Hietanummi, J. – Low and high consistency refining of reiforcement pulp. In: Scientific and Technical Advances in Refining & Mechanical Pulping – Course Notes. PIRA: Stockholm: 25-26/03/2003 Paper 11.
1361.
Espenmiller, H. P. – The theory and practice of refining. Southern Pulp and Paper Manufacturing, 32 (4): 50–57 (1969).
1368.
Szwarcsztajn, E. and Przybysz, K. – External fibrilation of beaten cellulose fibres. Cellulose Chemistry and Tecnhology (6): 223–238 (1972).
1369.
Dietmann, P. and Roux, J-C. – A study of disc refiner running in no-load conditions. Cellulose Chemistry Technology, 39 (5–6): 459–471 (2005).
1370.
Batchelor, W.; Krizinger, J.; Bauer, W.; Kuntzsch, T. and Meinl, G. – Improved characterization of changes in fibre coross section during sheet forming and drying using optical fibre analyzer data and a serial sectioning technique. In: COST Action E54 Fine Structure of Papermaking Fibres. Cost Action, Brussels, 2011 pgs 191–196.
1371.
Kerekes, R. J.; Soszynski, R. M. and Tam Doo, P. A. – The flocculation of pulp fibres. In: Papermaking Raw Materials, Transactions 8th Fundamental Research Symposium, Ed. Ponton, V., Mech. Eng. Publ. Ltd., Oxford: 1985 pgs. 265–310.
1372.
Rihs, J.; Albert, K. and Josephson, W. – Optimal refining of bleached tropical hardwood kraft for uncoated paper. In: 51st Annual General Conference. APPITA, Melbourne, 1997 Paper 4B21 pgs. 627–634.
1374.
Soini, P. and Partanen, M. – The effect of recirculation on pulp properties in refining of bleached hardwood and softwood pulps with a conical refiner. In: Preparing for the Next Millennium Conference. TAPPI, Atlanta, 1999 Volume 2 pgs. 711–727.
1375.
1376.
Wang, X.; Maloney, T. and Paulapuro, H. – Fibre fibrillation and its impact on sheet properties. Paperi ja Puu – Paper and Timber, 89 (3):148–151 (2007).
1377.
Somboon, P. – Quality developments in pulp fibers using conventional papermaking laboratory beaters and an industrial pilot refiner. Kasetsart Journal (Natural Science), 45: 883–890 (2011)
1378.
Keays, J. L.; McDowell, P. F. and Hatton, J. V. – Single-point procedure for PFI-mill evaluation of softwood kraft pulps. Tappi Journal, 60 (6): 81–83 (1977).
1379.
1380.
Dölle, K. and Bardhyl Bajrami, B. – Beating of eucalyptus pulp fibers under neutral and alkaline conditions – A Valley beater study. Journal of Engineering Research and Reports, 20 (8): 86–96 (2021).
1381.
Mohlin, U-B. – Refining of unbleached kraft pulps – the effect of pH and refining intensity. In: Tappi Paper Summit. TAPPI, Atlanta, 2002
1382.
1383.
Lundberg, R. and De Ruvo, A. – The influence of defibration and beating conditions on the paper making potential of recycled paper. Svensk Papperstiding, 81 (12): 383–386 (1978).
1384.
Mangini, L. F. K. and Andrade, A. A. – Ação de diferentes tipos de discos de refinação sobre as características das fibras químicas. In: 43th Congresso e Exposição Internacional de Celulose e Papel. ABTCP, São Paulo, 2010 11 pgs.
1385.
Cai, H.; Yuan, Z.; Tong, G.; Zhang, X. and Zhang, H. – Comparison of two bar edge lengths of refining plates on the properties of American old corrugated container pulp during low consistency refining. BioResources, 15 (1):347–359 (2020).
1386.
1387.
1388.
Sanjay, C.; Akansha, S.; Rajeev, S.; Shankarshan, S. and Narendra, A. – Optimization of fibre properties using single pass refining vs recirculation – A Case Study. IPPTA, 27 (04): 58–66 (2015).
1390.
Crook, J. – The practical refiner. In: IV International Refining Conference. PIRA, Fiuggi, 1997 Paper 11 pgs. 185–189.
1391.
1392.
1393.
Cisneros, H. A.; Williams, G. J. Hatton, J. V. – Fibre surface characteristics of hardwood refiner pulps. Journal of Pulp and Paper Science, 21 (5): 178–184 (1995).
1394.
Liu, H.; Dong, J. X.; Guo, X. Y.; Luo, C.; Tian, X. H.; Jiang, X. J.; Wang, S.; Yang, R. F.; Duan, C. W.; Wang, B.; Qi, K. – Study on fiber cutting performance of isometric straight bar plate with different bar angle. Journal of Korea TAPPI, 51 (5): 16–26. (2019).
1395.
Ryti, N. and Arjas, A. – Influence of residence time distribution of the flowing stock on the beating effect of a beating machine, Part II. Paperi ja Puu, 51 (1): 69–84 (1969).
1397.
1398.
Noe, P.; Joris, G. and Roux, J. C. – Pulp refining process. Volume I. Bonpertuis [710]
1399.
Marton, R.; Crosby, C.; Brown, A.; Bachorik, R. and Shook, P. – High-consistency refining. Espra Research Reports, 44 (III): 18–19 (1967) according to ABIPST, 67 (5): 728 reference 6663(BS).
1403.
Kerekes, C. and McDonald, J. D. – Fiber-based characterization of pulp refining. Tappi Journal, 21 (9): 497–503 (2022)
1404.
Zhang, Q., Xu, M., Xing, L., Dang, C., Han, X., and Pu, J. – Enzymatic assisted ultrasonic pretreatment’s effect on poplar pulp properties. BioResources, 12 (3): 6832–6843 (2017).
1405.
1410.
Liu, H.; Dong, J.; Jing, H.; Xiya Guo, X. and Qiao, L. – Characterization of the parameters for the refining Intensity in terms of performance. Journal of Korea TAPPI, 51 (2): 26–39 (2019);
1412.
Lee, J-Y.; Kim, C-H.; Park, S-H. and Sol Kwon, S. – Effects of refining intensities on physical properties of Interleaving paper for Stainless Steel. Journal of Korea TAPPI, 51 (6): 45–51 (2019).
Metadaten
Titel
Refining Operating Variables
verfasst von
Vail Manfredi
Copyright-Jahr
2024
Buch
Eucalyptus Kraft Pulp Refining

Print ISBN: 978-3-031-47284-8

Electronic ISBN: 978-3-031-47285-5

Copyright-Jahr: 2024

DOI
https://doi.org/10.1007/978-3-031-47285-5_10

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise