nach oben

Erschienen in:

29.12.2023 | STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Study on Nucleation and Growth of Columnar Grains in Non-Oriented Steel by Phase Transformation

verfasst von: L. Xie, X. Y. Liu, Y. X. Xu, M. T. He, J. T. Wang, J. Wang, M. Z. Wang, K. J. Hu, P. J. Li, C. Liu, C. F. Yao

Erschienen in: Physics of Metals and Metallography | Ausgabe 13/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The nucleation and growth of {100}-textured and “toothed” columnar grains in Fe–0.5% Mn non-oriented electrical steels were analyzed by considering the factors like cooling rate and flowing rate of the hydrogen through phase transformation. The results demonstrate that the formation of {100}-textured and “toothed” columnar grains with high grain orientation spread (GOS) values mainly involved the nucleation of {100}-oriented nuclei with high GOS values on the surface region in the incipient stage of the γ (austenite) → α (ferrite) transformation and the growth of them caused by both directed growth along normal direction (ND) and faceted growth on the rolling surface (RS) during solid-state transformation. The morphology, size and structure characteristics of columnar grains are explained in terms of the competitions between the nucleation rate and the rate of directed growth along ND or faceted growth on RS of ferrite nuclei. When the nucleation rate of ferrite nuclei is equal to their directed growth rate along ND during the γ → α transformation, {100}-textured and “toothed” columnar grains with high GOS values are obtained. With a higher nucleation rate of ferrite nuclei than the directed growth rate of {100}-oriented nuclei along ND, three-layer sandwiched structure is formed, including few {100}-textured and “toothed” columnar grain layers with high GOS values on the surface, whereas large numbers of {111}-textured equiaxed grains with low GOS values in the inner layer. In addition, when the faceted growth on the RS of {100}-oriented nuclei is dominant, heavy and coarse “toothed” columnar grains with high GOS values are obtained.

Vorheriger Artikel Precipitation Behavior of Primary Carbide in H13 Bloom Die Steel

Nächster Artikel Effect of Cold-Drawing Deformation on the Microstructure and Properties of AA2024-T8

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

H. Jiao, Y. Xu, L. Zhao, R. Misra, Y. Tang, M. Zhao, D. Liu, Y. Hu, and M. Shen, “Microstructural evolution and magnetic properties in strip cast non-oriented silicon steel produced by warm rolling,” Mater. Charact. 156, 109876 (2019). https://doi.org/10.1016/j.matchar.2019.109876CrossRef

S.-B. Kwon, Yo.-K. Ahn, Yo.-K. Jeong, T.-Yo. Kim, J.-T. Park, H. Han, and N.-M. Hwang, “Evolution of cube-on-face texture in Fe-1%Si steel induced by physical contact during the phase transformation from γ to α,” Mater. Charact. 165, 110380 (2020). https://doi.org/10.1016/j.matchar.2020.110380CrossRef

H.-T. Liu, J. Schneider, H.-L. Li, Yu. Sun, F. Gao, H.‑H. Lu, H. Song, L. Li, D.-Q. Geng, Z. Liu, and G.-D. Wang, “Fabrication of high permeability non-oriented electrical steels by increasing \(\left\langle {001} \right\rangle \) recrystallization texture using compacted strip casting processes,” J. Magn. Magn. Mater. 374, 577–586 (2015). https://doi.org/10.1016/j.jmmm.2014.08.05210.1016/j.jmmm.2014.08.052CrossRefADS

G. Zu, Ya. Xu, L. Luo, Yi. Han, S. Sun, R. Miao, W. Zhu, L. Gao, and X. Ran, “Effect of rolling temperature on the recrystallization behavior of 4.5 wt % Si non-oriented electrical steel,” J. Mater. Res. Technol. 17, 365–373 (2022). https://doi.org/10.1016/j.jmrt.2022.01.027CrossRef

W.-X. Dou, G. Yuan, M.-F. Lan, Yu.-X. Zhang, and M.-Yo. Zhu, “The significance of microstructure and texture on magnetic properties of non-oriented silicon steel: Strip casting versus conventional process,” Steel Res. Int. 91, 1900286 (2019). https://doi.org/10.1002/srin.201900286CrossRef

J. Kyung Sung and Ya. Mo Koo, “Magnetic properties of Fe and Fe–Si alloys with {100} \(\left\langle {0vw} \right\rangle \) texture,” J. Appl. Phys. 113 (17) (2013). https://doi.org/10.1063/1.479541810.1063/1.4795418

N. Zhang, P. Yang, and W. Mao, “Effect of rolling methods on microstructure, recrystallization texture and magnetic properties in a Fe–2.5% Si–0.52% Al non-oriented electrical steel,” Mater. Charact. 108, 85–93 (2015). https://doi.org/10.1016/j.matchar.2015.08.017CrossRef

X. Wu, P. Yang, X. Gu, and F. Cui, “Effect of the initial columnar-grained inhomogeneity of electrical steels on the transformation temperature,” Steel Res. Int. 93, 2100388 (2022). https://doi.org/10.1002/srin.202100388CrossRef

T. Tomida and T. Tanaka, “Development of (100) texture in silicon steel sheets by removal of manganese and decarburization,” ISIJ Int. 35, 548–556 (1995). https://doi.org/10.2355/isijinternational.35.548CrossRef

10.

J. Wang, P. Yang, L. Zhang, and W. Mao, “Formation of a sharp {100} \(\left\langle {001} \right\rangle \) texture in Fe–3% Si–1.7% Mn–0.05% C silicon steel sheets,” J. Mater. Sci. 51, 10116–10126 (2016). https://doi.org/10.1007/s10853-016-0240-x10.1007/s10853-016-0240-xCrossRefADS

11.

Yo. He and E. Hilinski, “Texture and magnetic properties of non-oriented electrical steels processed by an unconventional cold rolling scheme,” J. Magn. Magn. Mater. 405, 337–352 (2016). https://doi.org/10.1016/j.jmmm.2015.12.057CrossRefADS

12.

L. Kestens and S. Jacobs, “Texture control during the manufacturing of nonoriented electrical steels,” Texture, Stress, Microstructure 2008, 173083 (2008). https://doi.org/10.1155/2008/173083CrossRef

13.

Y. Hayakawa and M. Kurosawa, “Orientation relationship between primary and secondary recrystallized texture in electrical steel,” Acta Mater. 50, 4527–4534 (2002). https://doi.org/10.1016/s1359-6454(02)00271-9CrossRefADS

14.

P. Yang, J. Wang, D. Ma, S. Pang, F. Cui, et al., “Influences of composition on the transformation-controlled {100} textures in high silicon electrical steels prepared by Mn-removal vacuum annealing,” Acta Met.l Sin 58, 1261–1270 (2021). https://doi.org/10.11900/0412.1961.2021.00086CrossRef

15.

N. Yoshinaga, L. Kestens, and B. C. De Cooman, “α → γ → α transformation texture formation at cold-rolled ultra low carbon steel surfaces,” Mater. Sci. Forum 495–497, 1267–1272 (2005). https://doi.org/10.4028/www.scientific.net/msf.495-497.1267

16.

T. Tomida, S. Uenoya, and N. Sano, “Fine-grained doubly oriented silicon steel sheets and mechanism of cube texture development,” Mater. Trans. 44, 1106–1115 (2003). https://doi.org/10.2320/matertrans.44.1106CrossRef

17.

T. Tomida, “(100)-textured 3% silicon steel sheets by manganese removal and decarburization,” J. Appl. Phys. 79, 5443–5445 (1996). https://doi.org/10.1063/1.362332CrossRefADS

18.

J. Wang, P. Yang, and W. Mao, “Retention and evolution of texture in an electrical steel under vacuum annealing,” J. Mater. Sci. 52, 5462–5473 (2017). https://doi.org/10.1007/s10853-017-0790-6CrossRefADS

19.

J. Wang, P. Yang, and W. Mao, “Analysis of {100} texture formation in vacuum annealed electrical steel based on elastic anisotropy and surface energy anisotropy,” Steel Res. Int. 90, 1800320 (2019). https://doi.org/10.1002/srin.201800320CrossRef

20.

L. Xie, P. Yang, D. Xia, and W. Mao, “Microstructure and texture evolution in a non-oriented electrical steel during γ → α transformation under various atmosphere conditions,” J. Magn. Magn. Mater. 374, 655–662 (2015). https://doi.org/10.1016/j.jmmm.2014.09.033CrossRefADS

21.

J. Sung, S. Park, B. Shim, and Ya. Koo, “Effect of Mn on \(\left\langle {100} \right\rangle \) texture evolution in Fe-Si-Mn alloys,” Mater. Sci. Forum 702-703, 730–733 (2012). https://doi.org/10.4028/www.scientific.net/msf.702-703.730

22.

J. K. Sung, D. N. Lee, D. H. Wang, and Ya. M. Koo, “Efficient generation of cube-on-face crystallographic texture in iron and its alloys,” ISIJ Int. 51, 284–290 (2011). https://doi.org/10.2355/isijinternational.51.284CrossRef

23.

L. Xie, M. He, J. Wang, J. Wang, Ya. Lu, W. Xu, and C. Yao, “Abnormal growth of columnar grains and formation of Σ3 grain boundaries in non-oriented electrical steels,” Mater. Lett. 269, 127671 (2020). https://doi.org/10.1016/j.matlet.2020.127671CrossRef

24.

L. Xie, P. Yang, N. Zhang, C. Zong, D. Xia, and W. Mao, “Formation of {100} textured columnar grain structure in a non-oriented electrical steel by phase transformation,” J. Magn. Magn. Mater. 356, 1–4 (2014). https://doi.org/10.1016/j.jmmm.2013.12.045CrossRefADS

25.

R. L. Every and M. Hatherly, “Oriented nucleation in low-carbon steels,” Texture 1, 183–194 (1974). https://doi.org/10.1155/tsm.1.183CrossRef

26.

A. Borbély, J. H. Driver, and T. Ungár, “An X-ray method for the determination of stored energies in texture components of deformed metals; application to cold worked ultra high purity iron,” Acta Mater. 48, 2005–2016 (2000). https://doi.org/10.1016/s1359-6454(99)00457-7CrossRefADS

27.

P. Yang, D. Ma, X. Gu, and F. Cui, “On the transformation textures influenced by deformation in electrical steels, high manganese steels and pure titanium sheets,” Front. Mater. Sci. 16, 220582 (2022). https://doi.org/10.1007/s11706-022-0582-zCrossRef

28.

J. Asensio, G. Romano, V. J. Martinez, J. I. Verdeja, and J. A. Pero-Sanz, “Ferritic steels: Optimization of hot-rolled textures through cold rolling and annealing,” Mater. Charact. 47, 119–127 (2001). https://doi.org/10.1016/s1044-5803(01)00160-7CrossRef

29.

J.-T. Park and J. A. Szpunar, “Evolution of recrystallization texture in nonoriented electrical steels,” Acta Mater. 51, 3037–3051 (2003). https://doi.org/10.1016/s1359-6454(03)00115-0CrossRefADS

30.

L. Xie, M. He, L. Sun, J. Wang, Ya. Lu, and C. Yao, “Columnar grain growth in non-oriented electrical steels via plastic deformation of an initial columnar-grained solidification microstructure,” Mater. Lett. 258, 126797 (2020). https://doi.org/10.1016/j.matlet.2019.126797CrossRef

31.

L. Xie, S. Liu, M. He, J. Wang, J. Wang, Ya. Lu, W. Xu, and C. Yao, “Growth and strain behavior of columnar grains in Fe–0.5% Mn alloy by hot-rolling,” J. Alloys Compd. 877, 160257 (2021). https://doi.org/10.1016/j.jallcom.2021.160257CrossRef

Titel: Study on Nucleation and Growth of Columnar Grains in Non-Oriented Steel by Phase Transformation
verfasst von: L. Xie
X. Y. Liu
Y. X. Xu
M. T. He
J. T. Wang
J. Wang
M. Z. Wang
K. J. Hu
P. J. Li
C. Liu
C. F. Yao
Publikationsdatum: 29.12.2023
Verlag: Pleiades Publishing
Erschienen in: Physics of Metals and Metallography / Ausgabe 13/2023
Print ISSN: 0031-918X
Elektronische ISSN: 1555-6190
DOI: https://doi.org/10.1134/S0031918X23601142

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 13/2023

Microstructure Characteristic and Evolution Mechanism of Cu–Ni–P Alloys under Different Cooling Rate

Precipitation Behavior of Primary Carbide in H13 Bloom Die Steel

Effect of Nb Doping on Thermoelectric Properties of TiNiSn Half-Heusler Alloy Prepared by Microwave Method

Effects of Bi Inclusion on Tensile Mechanical Property and Deformation Mechanism of Nanopolycrystalline Fe: A Molecular Dynamics study

An Atomistic Structure of Cementite (M3C, M = Fe, Cr, Mn) in Carbon Steel

The Effect of Grit Blasting on Surface Roughness and Hardness of Magnesium Alloy AZ31B: A Statistical Study